Kimo DBM 620 Air Flow Meter is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings from air vents.

FEATURES

• Simultaneous display of up to 4 parameters. Choose between airflow, humidity, atmospheric pressure, temperature, differential pressure and air velocity
• Simultaneous display of air flow and temperature, automatic airflow direction (extraction or air blast)
• Automatic averaging or point by point averaging, HOLD function
• Removable measuring unit (micromanometer function)
• Display on smartphone or tablet by Bluetooth connection
• Standard accessories: 610 x 610mm hood with flow straightener and flodable frame, 2 x 0.80 m of silicone tube, 1 Removable measuring unit with Bluetooth® connection, 1 Base including the measurement grid and a temperature and hygrometry probe, a transport case and a calibration cert.

Available Hoods
DBM 620 air flow meter comes in standard with a 610 x 610mm hood. 4 other hoods are available as options:
• 1020 x 1020 mm
• 720 x 720 mm
• 720 x 1320 mm
• 420 x 1520 mm

MEASURING RANGES

• Portata (parametro calcolato) :  35.00 m³/h … 4250.00 m³/h
• Velocità (parametro calcolato) : 0.20 m/s … 10.00 m/s
• Temperatura (NTC) :  -20.00 °C … 70.00 °C
• Umidità relativa (sensore capacitivo) : 0.00 % RH … 100.00 % RH
• Pressione atmosferica  :  700.00 hPa … 1100.00 hPa
• Pression  :  -2500.00 Pa … 2500.00 Pa

The DBM 620 Air Flow Meter comes equipped with the SmartKap mobile app. You can use SmartKap to connect to your DBM 620 via the Bluetooth® protocol, allowing you to configure the device, as well as visualize and save its measurements.

Please refer to the product’s datasheet (pdf).

The most accurate handheld hot-wire anemometer of its kind.

The Climomaster anemometer is a research grade handheld hot-wire anemometer that promises level 2% m.v. accuracy, making it the most accurate hot-wire airflow meter in the world. It offers a ton of flexibility and options including 8 different probes types. These probes are all interchangeable and can be used with a single main unit without any additional calibration.

Climomaster Hot-Wire Anemometer – 6501 Series probes can measure temperature and/or humidity along with air flow. Other probes are designed for use in turbulent or high-velocity airflow and some are miniaturized for use in really tight spaces like those encountered when checking the cooling profile of a circuit board. The unit comes standard with 20,000 record storage capacity and advanced data logging capability. It can also be ordered with a pressure sensor and analog output if desired. Many additional accessories such as software, extension rods, hands-free case and special cable lengths are also available.

Features & Benefits

• Its sleek, ergonomic design with anti-slip grip comes standard with a highly visible backlit display making it the handheld choice of Journeymen technicians in the field.
• Stores up to 20,000 data points which is easily downloaded to your company computer for analysis via the USB interface.
• The optional software allows the users to view real-time data graphically formatted on their company computer
• For your convenience the anemometer keeps track of its own calibration cycle and reminds you when it is due for calibration*.
• The Climomaster 6501-CE measures pressure and features an analog output.
• Equipped with an automatic atmospheric pressure compensation function.
• When the direction of the airflow is known, choose a unidirectional probe.
• When the direction of the airflow is unknown or turbulent, choose an omnidirectional probe.

Download datasheet here (pdf).

Model: Kestrel 3000

The Kestrel 3000 Pocket Weather Meter is the perfect environmental tool for professional and collegiate athletic trainers, storm chasers, and wildland firefighters alike who understand the importance of monitoring field conditions and keeping workers and athletes safe in hot and humid conditions. You know you’re working hard – make sure you’re staying safe. The Kestrel 3000 pocket weather meter keeps you from working past your limits.

Features of the Kestrel 3000 Weather Meter

• Maximum Wind Gust
• Wind Speed 3 Second Running Average
• Air, Water, & Snow Temperature
• Protective cover with sure-grip over molding
• Data hold function
• Large easy-to-read display with backlight
• Backlight
• Waterproof to IP67 Standards (Can be submerged up to 3’/1M for up to 30 minutes)
• Extremely rugged and drop tested to MIL-STD-810G standards
• User-replaceable impeller
• External temperature sensor
• Patented Quick-Response RH Sensor
• All instruments and accessories are completely assembled in the USA
• 5-Year Warranty

Environmental Measurements

• Dew Point Temperature
• Heat Stress Index
• Relative Humidity
• Temperature (air and water)
• Wind Chill
• Wind Speed

Please download the datasheet (pdf) here.

FEATURES

• The anemometer display velocity and temperature measurements
• Selection of units (air velocity, airflow and temperature)
• Display max / min values and hold function is available
• Dimensions of rectangular and circular duct
• Detection of flow direction

Available model based on measuring ranges as below:

• LV 110 : 0.30 m/s … 35.00 m/s
• LV 111  : 0.80 m/s … 25.00 m/s
• LV 117  : 0.40 m/s … 35.00 m/s
• LV 110- LV111-LV 117  : 0.00 m³/h … 99999.00 m³/h
• LV 110- LV111-LV 117  : -20.00 °C … 80.00 °C

Please refer to the product’s datahseet (pdf).

Model: Kestrel 2000

The Kestrel 2000 Hand Held Weather Meter is a perfect companion of any outdoor enthusiast that relies on knows either wind speed, temperature, or both! Capable of measuring the air temperature, the waterproof Kestrel 2000 can also measure the temperature of water or snow. Simply dip the meter in water or snow for 30 seconds to know just how cold it is before jumping in. A hard slide-on case, lanyard, and battery are included and the Kestrel 2000’s backlight allows you to check the measurements even in the darkness.

Features

• Temperature Sensor (Patented External Isolated)
• Waterproof to IP67 standards (can be submerged up to 3’/1M for up to 30 minutes)
• Backlight
• Data hold function
• User replaceable impeller
• Reliable, portable and easy to use
• Assembled in the USA
• 5 year warranty

Environmental Measurements

• Current Wind Speed
• Maximum Wind Gust
• Average Wind Speed
• Temperature (Air, Water, & Snow)
• Wind Chill

Please download the datasheet (pdf) here.

Model: Kestrel 3500

The Kestrel 3500 Weather Meter is designed as a full weather meter that has the ability to measure environmental variables such as temperature, wind speeds, barometric phenomena, pressure trends of up to 3 hours, and more. This rugged and affordable meter provides a complete range of reliable weather measurements. For those in need of a full reading of the latest weather information, the 3500 is the ideal Kestrel Meter.

The Kestrel 3500 Weather Meter has all the capabilities of the Kestrel 3000, plus additional key features:

• Barometric Pressure
• Barometric Trend
• Altitude
• Clock

In addition to the pressure trend indicator, the Kestrel 3500 also has the advantage of altitude and barometric pressure measurements. With these features on hand at anytime, the Kestrel 3500 becomes an ideal weather instrument for outdoor enthusiasts, sportsmen and sportswomen, and anyone else that will benefit from accurate and up to the second weather and barometric information. The Kestrel 3500 also offers Barometric Trend. This component is an arrow indicator that will indicate the trend of the previous 3 hours, even if the meter was off. If the batteries are changed, the arrow will show just the current trend, not historical.

Environmental Measurements

• Altitude (Barometric)
• Barometric Pressure
• Dew Point Temperature
• Heat Stress Index
• Relative Humidity
• Temperature (air and water)
• Wet Bulb Temperature (Psychrometric)
• Wind Chill
• Wind Speed/Air Speed

Please download the datasheet (pdf) here.

The Kimo LV 130 precisely measures air velocity and ambient temperature with a rotating vane probe.

FEATURES

• Precisely measures air velocity and ambient temperature with a rotating vane probe
• Selection of units (air velocity, airflow and temperature)
• Display max / min values with hold function
• Detection of flow direction
•  Airflow calculation and automatic average

MEASURING RANGES

• Velocity : 0.30 m/s … 35.00 m/s
• Airflow : 0.00 m³/h … 99999.00 m³/h
• Temperature : 0.00 °C … 50.00 °C

Please refer the product’s datasheet (pdf).

Model: Kestrel 5500

This Kestrel meter does it all! The Kestrel 5500 Weather Meter provides the same trusted accuracy, reliability, and usability as the original Kestrel 4500. Measure every environmental condition plus wind direction, crosswind and headwind/tailwind. Use it golfing, sailing, flying, spraying, shooting and more. Drop-proof, dust-proof, waterproof and able to withstand extreme environments without damage, your Kestrel weather meter travels with you anywhere you dare to go. A range of carry pouch options makes it even easier to take your Kestrel meter with you.

Kestrel 5500 is available in:

• Non Bluetooth
• W/ Bluetooth LiNK & Vane Mount
• Tripod (sold separately)
• Colors: Yellow, Olive Drab, Desert Tan

Features

• Dongle
• Bluetooth LINK to Smartphones / Mobile / Android / IOS
• Takes 1 AA battery (instead of 2 AAA)
• Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series<
• Improved high resolution screen for any lighting (even sunlight) and easy on your eyes.
• Intuitive user-interface screen navigation
• Multiple Languages: English, French, German, Spanish
• Scratch and breakage-resistant window
• All meters include both options of Red (NV – Night Vision) & White backlights.
• Slightly bigger, not really noticeable difference.  Fits same cases.
• Includes vane mount with 5500 LiNK option
• Roughly 12,000 data points.
• Digital Compass
• Wind Direction
• Crosswind
• Headwind / Tailwind

Environmental Measurements

• Altitude (Barometric)
• Barometric Pressure
• Compass Direction
• Crosswind
• Density Altitude
• Dew Point Temperature
• Headwind/Tailwind
• Heat Stress Index
• Relative Humidity
• Station Pressure (Absolute Pressure)
• Temperature
• Wet Bulb Temperature (Psychrometric)
• Wind Chill
• Wind Speed/Air Speed

Please download the datasheet (pdf) here.

Replacement impeller for all Kestrel Meters. User replaceable.

Impeller Replacement Instructions

Using your thumbs, press FIRMLY on the impeller module to remove the entire unit.

Press only the sides of the new impeller  when installing to avoid damaging the precision hub bearing.

Insert the impeller so that the half that has the serial number label on it goes in first and faces the back of the unit once in place.  Orient one “arm’ straight up (The impeller should look like a peace symbol or an upside-down Y).

Kimo’s VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe.

FEATURES

• Perfect for measuring airflow, air velocity and temperature with its hot wire probe
• Display max / min values
• Airflow calculation with cone
• Dimensions of rectangular and cicular duct
• Air velocity compensation in atmospheric pressure

MEASURING RANGES

• Velocity : 0.15 m/s … 30.00 m/s
• Airflow : 0.00 m³/h … 99999.00 m³/h
• Temperature : -20.00 °C … 80.00 °C

Please refer to the product’s datasheet (pdf).

Compatible with the Portable Vane Mount and any Kestrel Meter.

Available Tripod:

Kestrel Meter Collapsible Tripod

• Stands 48.25 inches high when fully extended 51.4″)
• Measures 13.6 inches when collapsed
• Five section twist-and-pull legs
• Weighs under 2 lbs
• Compatible with the Kestrel Portable Vane Mount
• Place of Origin: China
• Included Clamp that mounts a Kestrel Meter
• Included Carry case for the Tripod

Kestrel Portable Mini Tripod

• Tripod Clamp is optional
• Maximum Safe Load: 6 lbs
• Measures 7.5″ to the base when standing on a flat surface
• Pan Adjustment: 360 degrees
• Tilt Adjustment: +/- 90 degrees
• Angular Adjustment: +/- 20 degrees
• Part #: With Clamp: 0799. Without Clamp: 0796
• Dimensions (folded): 7″ x 2″ x 2″, 17.8cm x 5.1cm x 5.1cm
• Weight: 4.2 oz., 119g

Model: Kestrel 5000

The Kestrel 5000 Pocket Weather Meter is the baseline wind and weather meter in the Kestrel 5000 series. While the Kestrel 5000 Pocket Weather Meter is similar in wind and weather monitoring functions available with the Kestrel 3500 Wind Meter, it has several advantages such as Bluetooth connectivity, data storage, graphing functions, and computer interface technology. It has the capacity to store up to 10,000 data points of weather data, enabling you to track changes in the environment over time, view these changes as graphs on your Kestrel 5000’s display, and even upload the data to your PC or Mac. The Kestrel 5000 series is now available with optional Bluetooth LINK Technology, which allows your Kestrel to communicate with your Android or iOS device up to 100 feet away, and maximize the battery life of your weather meter.

Each Bluetooth Meter includes custom communication software designed to quickly and easily configure your data transmission frequency, download logged data, graph data, and transfer data to other applications.

As with all 5000 series Kestrel meters, they have both a white backlight (which is even great for daytime use) and a night-vision preserving backlight. The red night vision (NV) backlight incorporates an optical filter to reduce overall brightness and minimize blue and green spectrum light to preserve night vision. (Note: This backlight appears soft greyish pink, not “red”, and is still in the visible spectrum, so is not compatible with night-vision equipment.) Basically, with the red backlight, your eyes don’t need to adjust when looking from your meter to the horizon in night time use.

FEATURES:

• Waterproof
• Easy to read, backlit screen with high resolution for even bright sunny conditions.
• Time and date
• Exterior temperature, humidity, and pressure sensors for fast and accurate readings
• Minimum, maximum, and average values
• Automatically store measurements, even when the unit is turned off
• Manually store measurements with the press of a button
• Customizable data storage – 10,000 data points
• Graph and recall trends
• Customize screens to display user-selected measurements
• Data charting
• Data upload (with optional interface or Bluetooth)
• Five languages (English, French, Spanish, German, and Italian)
• User-replaceable impeller
• Flip-top impeller cover allows use of other functions while protecting the impeller
• All instruments and accessories are completely assembled in the USA

Environmental Measurements

• Altitude (Barometric)
• Barometric Pressure
• Density Altitude
• Dew Point Temperature
• Heat Stress Index
• Relative Humidity
• Station Pressure (Absolute Pressure)
• Temperature
• Wet Bulb Temperature (Psychrometric)
• Wind Chill
• Wind Speed/Air Speed

Please download the datasheet (pdf) here.