DewMaster Chilled Mirror Hygrometer

A fast, multi-function, high precision chilled mirror hygrometer for continuously monitoring the dew/frost point temperature, parts per million water vapor by volume or percent relative humidity in gas streams.

The DewMaster is a laboratory grade, high precision, field proven instrument with multiple available sensor configurations and wide applicability to fit all budgets.

 

  • Measurement Ranges and PPMv Ranges:
    0 to 100% RH with all sensors, non-condensing conditions
    0 to 999,999 PPMv with all sensors, non-condensing conditions

 

  • Accuracy:
    ±0.2°C (0.36°F) dew/frost point standard
    ±0.1°C (0.18°F) dew/frost point optional
    ±0.5% of full scale pressure

 

  • Air Temperature Sensor Range:
    -100 to 250°C (-148 to 482°F)
    ±0.1°C accuracy

 

Please refer to product’s datasheet (PDF)

 

Orion 796, ISOTECH Stirred Liquid Baths

Model: Orion 796

 

The Orion calibration baths oer deeper calibration volumes than the Isotech Hydra series with world class temperature stability. There is a high temperature model (30°C to 300°C) and a model with built in refrigeration (-40°C to 125°C).
These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.

 

Three model available with ±0.006°C accuracy:

  • Model: 796L  (-80°C – 125°C)
  • Model: 796M (-40°C – 125°C)
  • Model: 796H (-30°C – 300°C)

 

Please refer to product’s datasheet (PDF)

 

Product Dimensions (mm): 485 x 525 x 1150

Hydra 798 – ISOTECH Stirred Liquid Baths

Model: Hydra 798

 

Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. This gives the smallest overall uncertainties.
The cooling is built-in and also surrounds the calibration volume creating a low temperature ambient in which the heater can function efficientlys. A unique cooling system cools the unit as well as enabling the bath to heat up to 125°C (121°C is a key sterilization temperature).

 

Three model available:

  • Model: 798L (-80°C – 125°C) with ±0.030°C accuracy
  • Model: 798M (-40°C – 125°C) with ±0.017°C accuracy
  • Model: 798H (-30°C – 300°C) with ±0.015°C accuracy

 

Please refer to product’s datasheet (PDF)

 

Product Dimensions (mm): 405 x 610 x 940

QuickCAL – Isotech Portable Dry Block Temperature Calibrator

Two models available:

QuickCal 550: 30° to 350°C;

QuickCal 560: -12° to 140°C

 

  • Accuracy: 0.4°C to 0.2°C, using comparison techniques
  • Wide temperature ranges: covers most critical test points
  • Light 1.5kg, compact, portable and fast: nine minutes to reach temperature
  • Interchangeable inserts: have one unit with multiple inserts to suit different sensor diameters

 

Please download product’s datasheet here. (pdf)

MFC5150x – Meriam Intrinsically Safe, HART Communicator

Model: MFC 5150X

 

Handheld calibrators and filed communicators. Available in ATEX (intrinsically safe) and Non-ATEX models, the MFC5150 directly reads Device Descriptions with Free upgrades/downloads for life the product – no subscriptions!

 

  • The MFC5150 is built on the SDC-625 infrastructure and runs Windows CE
  • With a 1 GHz processor and an 4 GB Micro SD card, this HART® communicator is ideal for all
    of your data storage needs
  • The 4.3 inch touchscreen provides excellent anti-glare viewing, allowing for comfortable
    mobile use in darkness or in bright sunlight
  • All functions are easily navigated via the full QWERTY keyboard and intuitive icons similar
    to that of a smart phone.
  • Features hyperlink menu paths, teachable device specific shortcuts, instant on, multiple languages,
    help context, video’s and TAB access to panes just like on a computer.
  • The MFC5150x is certified in the following Hazardous locations : Class I, Division I Group IIC
    (US/Canada), ATEX Zone 0 Group IIC (Europe), IECex Zone 0 Group IIC (Asia, South America, Africa)

 

Please refer to product’s datasheet (PDF)

 

 

MilliK, ISOTECH Precision Thermometer

Model: MilliK

 

A high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to 1820°C

 

  • Has two input channels for sensors and a third channel for current
  • The milliK can control Isotech temperature sources, sequencing through
    a programmable list of temperature set points and log data to internal memory or
    a USB drive.
  • Can display in °C, °F, K, Ohms, mV and mA with numeric and graphical display modes
  • High Accuracy < ±5ppm for PRTs, ±2μV for Thermocouples and ±1μA Transmitters

 

Please refer to product’s datasheet (PDF)

 

MicroK, Isotech Precision Thermometry Bridge

Model: MicroK

 

The microK family of precision thermometry bridges use a completely new measurement technique to achieve accuracies to better than 0.02ppm.

 

  • Supports SPRTs, IPRTs, Thermistors and Thermocouples
  • High accuracy thermocouple measurements with a voltage uncertainty of <0.25μV
  • Can display in °C, °F, K, ratio, resistance, voltage with numeric and graphical display
    modes
  • Simple Touch Screen operation with easy to use interface and data logging options
  • Can connect USB Memory Stick, Keyboard, Mouse
  • No PC needed, the display can show temperature and resistance in addition to ratio

 

Please refer to product’s datasheet (PDF)

M1000 – Meriam Digital Pressure Calibrator

Model: M1000

 

Single function calibrator at standard accuracy of ±0.025% FS

 

  • Device c/w calibration certificate traceable to
    NIST
  • Delivers ±[(0.02% of FS) + (0.005% of Reading)]
    accuracy
  • Measures Differential, Gauge, Absolute Pressure
  • 8 selectable pressure units
  • Operating Temperature: -4 °C to +50°C
  • Can be calibrated in the field for zero and span
  • Leak testing for low pressure gas systems
  • Pressure drop monitoring across filters
  • Monitoring vacuum on condensers or pumps

 

Please refer to product’s datasheet (PDF)

M2000 – Digital Smart Manometer

Model: M2000

 

Features NIST traceable accuracy ± 0.025 % FS with 30 selectable pressure units

 

  • Device c/w calibration certificate traceable to
    NIST
  • Delivers ±[(0.02% of FS) + (0.005% of Reading)]
    accuracy
  • Measures absolute, differential & compound
  • Operating Temperature: -10 °C to +50°C
  • RTD (Temperature) accessory sensor option
    class A PT 100 available:
    – Temperature Accuracy ± 0.15 + 0.002 ltl°C
    – Measurement range of -50 C° to 250°C
  • Leak Test function

 

Please refer to product’s datasheet (PDF)

MFT 4010 – Meriam Modular Calibrator with HART® Communicator

Model : MFT 4010

 

All-in-One tool. Takes the place of multiple handheld instruments, simplifies workload and improves productivity

 

  • Multifunctional tester: Modular Calibrator, HART Communication, Documentation with Meriam’s DMS Database Software
  • Calibration types supported: Pressure, T/C, RTD, I/P, P/I, Switch, Loop and mA/V for conventional or HART transmitter or local indicators
  • Device Specific HART commands for smart Analytic, Flow, Level, Pressure, Temperature & Valve devices
  • Three sensor bays for a variety of pressure, temperature and electrical measurement and simulation Sensor Modules
  • Intrinsically Safe option
  • Accuracy: ±0.025%FS traceable to NIST with full temperature compensation from -5 to 50°C

 

Modules Available

  • Thermocouple Measurement and Simulation
  • Pressure Module
  • RTD Measurement and Simulation
  • Voltage, Current & Simulate and 24V DC Isolated Loop Power

 

 

Please refer to product’s datasheet (PDF)

 

Hyperion R – Isotech Black Body Source

Model: Hyperion R 982

 

Low Temperature Blackbody Source, -10°C to 80°C with accuracy ±0.01°C.

 

  • Portable black body calibration source for non-contact thermometers ranging from -10 to 80°C
  • Suitable as primary radiation source for infrared thermometers from sub zero to 80°C
  • Laboratory performance and low uncertainty calibrations
  • Built-in temperature indicator and included platinum resistance thermometer
  • Excellent temperature uniformity

 

Please refer to product’s datasheet (PDF)

Gemini R – Isotech Black Body Source

Model: Gemini R 976

Medium Temperature Blackbody Source, 30°C to 550°C with accuracy of ±0.1°C

 

  • Portable black body calibration source for non-contact thermometers ranging from 30 to 550°C
  • Laboratory performance and low uncertainty calibrations
  • Built-in temperature indicator and included platinum resistance thermometer
  • Excellent temperature uniformity
  • For the smallest of uncertainties the Gemini R may be used with Isotech ITS-90 Fixed Point Cells,
    Gallium 29.7646°C, Indium 156.5985°C, Tin 231.928°C and Zinc 419.527°C

 

Please refer to product’s datasheet (PDF)

 

1 2 3 4 5 6 7 19 20 21