Pegasus R, Isotech Black Body Source
Model: Pegasus R 970
High temperature blackbody source, 150°C to 1200°C with accuracy of ±0.1°C
- Portable black body calibration source for radiation pyrometers
- Laboratory performance and low certainty calibrations
- Built-in temperature indicator and included platinum resistance thermometer
- Excellent temperature uniformity
Please refer to product’s datasheet (PDF)
Model 989, Isotech Black Body Source
Model: Black Body Source, 989
It was used to increase the accuracy of thermal imagers measuring human skin temperature in temperature screening of applications. It can also be used to check non-contact clinical thermometers. The upgraded controller can either be locked to a single temperature or it can be adjusted over a new wider temperature range of 20°C to 50°C. Model 989 also has a PC
interface fitted as standard. It allows the temperature to be both monitored and adjusted from a PC.
Please refer to product’s datasheet (PDF)
- Improves accuracy of Fever Detection Systems
- Covers 20°C to 50°C with Fast Thermal Response
- Check Non-Contact Thermometers
- The blackbody can maintain its set point in high ambient temperature conditions and it can also operate below the ambient temperature
MPG 7000 Plus – MeriGauge® Plus Digital Pressure Gauge
Model: MPG 7000 Plus
The MPG7000 Plus is a digital pressure gauge with inter-changable sensors, allowing flexibility to the user, sensors contain the calibration, various types and ranges.
- 10 Interchangeable Smart Sensor Modules
- Compound gauge pressure range -14.5 to 3000 PSIG
- Ranges 15-3000 psi
- Gauge works with all meriSense sensors
- Up to 32 engineering units
- Fully configurable via meriLink™ PC Software
- Update rate, 5 measurements per second
- Standard delivery: Meriam MPG7000 Plus Digital Pressure Gauge, Sensor module 0-300 PSIG
- Intrinsically Safe, IP 66
Please refer to product’s datasheet (PDF)
TS-DPG-110, Taishio High Accuracy Digital Pressure Gauge
High-precision pressure sensor 0.2% FS accuracy
- 4-digit LCD showing the pressure reading accurately in real time
- Different pressure units to choose from, zero clearing, backlight on/off
- Display units: kPa, PSI, kg/cm2, Bar, MPa
- Battery-powered, low-power design
- High-precision pressure sensor 0.2%FS
- Overload Capacity 150%
- Operating Temperature 0 to 40°C
Please refer to product’s datasheet (PDF)
MGF16BN – Meriam Digital Pressure Gauge (Medical)
The MGF16BN digital pressure gauge is designed to handle the demands of pressure measurement. Pressure ranges are available to 5 000 PSIG at standard accuracy of ± 0.25 % of full scale or higher accuracy of ± 0.1 % of full scale.
The display is a 4 digit LCD with 0.5″ high numerals and a lower alphanumeric display for engineering units to aid in set up. Each gauge includes up to 15 selectable engineering units depending on the sensor range. The gauge is powered by two AA alkaline batteries.
- ±0.25% Test Gauge Accuracy
- 316L Stainless Steel Wetted Parts
- NEMA 4X
- Capture Minimum and Maximum Readings
- Push Button Zero
- Selectable Engineering Units
- Selectable Auto Shutoff Times
Please refer to product’s datasheet (PDF)
TS40P, Taishio Pneumatic Pressure Handpump
- Pressure to 40 Bar, vacuum better than 0.95 bar
- Through hand operated scissors action pump
- With 1m flexible hose with 1/4″ BSP (F) swivel adaptor for connecting the test instrument
- Combination of vacuum and pressure
Please refer to product’s datasheet (PDF)
DOS 001 – Stiko Deadweight Testers
High accuracy deadweight tester with an accuracy of 0.01% of reading.
- Two 4-wire analogue output 0-5/10 V or 0/4-20 mA
- ABS housing IP 65, with or without 2-lines 19-digits LCD display, 2 relays, software or keyboard
configuration - Quick and easy mounting with the 1/4 turn system with wall-mount plate
- Configurable air velocity range from 0 to 30 m/s with hotwire probe
Please refer to product’s datasheet (PDF)
LOG32TH, Temperature & Humidity PDF-Datalogger
Temperature & Humidity logger with the integrated USB-interface.
- Automatic PDF creation and useable without software
- Approximately 60,000 measurements (temperature & humidity)
- Free adjustable recording interval 30 seconds up to 24 hours
Features
- Memory size: 60.000 measurements
- Usable without software (default settings)
(5-minutes-interval, without alarm settings) - Automatic PDF creation (no drivers required)
- Optional software download (free adjustable recording interval: 30 seconds…24 hours)
- Status- and Alarm-LEDs
- Includes wall mount
Please download the datasheet here. (pdf)
SterilDisk Datalogger for Temperature
High measuring range up to 140°C, water- and pressure resist (IP 68 and 10 bar).
Food-safe steel AISI316L, memory for 20.000 readings,
Measuring interval from 1s . High accuracy: +-0,2°C.
Battery can be changed independently.
SPECIFICATION
| Measuring range | -20°C…+140°C |
| Resolution | 0,01°C |
| Accuracy | ±0,2°C within calibrated range +25…140°C |
| Memory | 20.000 measurements |
| Voltage | battery, changeable |
| Battery life | Calculated battery lifetime at 25°C and interval 1s approximately 1.400.000 acquisitions |
| Dimensions | Logger18 x 36 mm Cable 300 x 4mm Sensor 50 x 3mm |
| Weight | 80 g |
Temp NFC – Single and Multi Use Datalogger
Manage temperature monitoring using smartphones or tablets and INSTANTLY share the readings you downloaded. This is a data logger for temperature controlled transports. Download the free App, manage your data loggers, share the information and focus only on your tasks.
Features
- Start and download logs using NFC enabled Android devices (App downloadable from Google Play)
- Long life battery enclosed; 10 year shelf life in standby
- Manual start option by means of the Start button
- Mission status LED and button (running, stopped, OK, alarm)
- Real time checks against alarm thresholds and transport duration; MKT calculation is done on the App
- Bar Code and QR Code scan of the items being monitored in the shipment
- Geolocalization of the start and stop positions, saved with the mission data
- View Readings in graphical or tabular format
- Create mission templates to quickly start the devices, without entering settings every time.
- Additional Information: sender, receiver, operator, notes etc.
- Automatically send PDF reports to the email address set by the person sending the goods
Please download the datasheet here. (pdf)
ThermaData Wifi – WiFi Data Logger with Internal Sensor
Access your critical temperature data from anywhere in the world with our new ThermaData Wi-Fi Loggers. Use your existing Wi-Fi router network with no additional gateways or repeaters to transmit and view temperature readings of walk-ins, cooking areas, prep areas, cold holding, ovens, and much more.
Features
- resolution of 0.1 °C/°F
- programmable high/low alarm
- email alerts when alarm limits exceeded
- access temperature data worldwide via internet
- user friendly, simple setup
- a battery powered, cost-effective, temperature monitoring system
- Accuracy to ±0.7°F (±0.4°C)
- Wireless connectivity using existing WiFi network
Please download the datasheet here. (pdf)
Weatherhub – Wireless Monitoring System
Starter set for the monitoring of heating systems WEATHERHUB OBSERVER.
Use the WEATHERHUB OBSERVER web platform for professional heating monitoring and documentation.
The starter set includes a thermo-hygro transmitter for measuring the room air (temperature and humidity). At the same time, the temperature can be measured at a measuring point around the heating system using the special extra-flat cable sensor.
Features
- Large measuring range (up to 110 ° C)
- High accuracy
- Data transmission every 3.5 min.
- The measuring data will be sent via the gateway and the Internet directly to a server
- Easy installation and operation
- Display of the recorded data as a clear diagram, adjustable to fixed time ranges – day, week or month
- Availability of the data on the server for min. 90 days
- Export of data as PDF (graphically) or as CSV file (text file)
- Automation of the monitoring possible, export of the data via e-mail
- Extensive possibilities for setting alerts (via e-mail)
- The WEATHERHUB OBSERVER platform is free of charge and does not require any additional costs or subscription fee, costs will only arise for the required hardware and, if necessary, for the Internet connection
Please download the datasheet here. (pdf)
Dyzle – Temperature and Humidity Wireless Sensor
The accurate and digital sensors are installed in the cold chain. The sensors communicate wirelessly with the access point via a very reliable WiFi protocol. The access point sends all data via a secure mobile connection to our servers. You simply log in to the online Dyzle portal. Here you can easily manage and check your data, reports, users and alarms.
You will of course receive reports in your e-mail. This also applies to alarms, which you can also receive via SMS and IVR. Unlike many other parties, we develop and produce all components of the solution in-house. This gives us a lot of control over the quality, operation and functionality of our solutions.
Please download the datasheet here. (pdf)
KH50 / KT50 – Kimo Temperature & Humidity Datalogger
When simple temperature and humidity readings are required, look no further than the KH 50 / KT 50 Data Logger. It has 16,000 measuring points.
Data Loggers are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.
Features
- 16,000 measuring points
- Measures two parameters simultaneously
- Magnetic back for fast & simple mounting
- Fast data download (1,000 points/second)
- Free downloadable basic software
- 1-Line LCD screen
Please download the datasheet here. (pdf)
KH120 / KT120 – Kimo Temperature & Humidity Datalogger (HVAC range)
The KT 120 USB Data Logger is the perfect solution for monitoring temperature data that can easily be extracted via the on-board software and direct USB connection.
Data Loggers are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.
Features
- Direct USB connection
- Integrated software
- On-board compliance certificate
- Large storage capacity of 50,000 points
- 1-Line LCD screen
- Magnetic back for fast & easy mounting
Please download the datasheet here. (pdf)
KT220 / KH 220 / KTT 220 – Temperature / Humidity / Light / Current Voltage / Impulsion / Water pressure Datalogger
The KH 220 / KT220 Multifunction Data Logger is the answer when up to five parameters need to be recorded simultaneously.
Data Loggers are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.
Features
- Free downloadable basic software
- 2 configurable set point alarms
- Large storage capacity of 1 million points
- Input for 1 universal probe
- Magnetic back for fast & simple mounting
- Monitoring mode for detailed reporting outside of set points
Please download the datasheet here. (pdf)
KT320 / KTT320 – Temperature / Hygrometry / Current / Voltage / Impulse Datalogger
Need quick access to data but don’t want to remove the logger from its location? The KT 320 series Bluetooth® Multi-Function Data Logger utilizes Bluetooth® communication via the Kistock Mobile app which allows for connection between the logger and a smartphone or tablet. It can also measure up to five recordable parameters simultaneously.
Features
- Bluetooth® communication for smartphones & tablets (Android and iOS)
- Large storage capacity of 2 million point
- Supplied with an anti-theft wall mount with lock
- 2 Smart plug probe inputs
- Large easy to read 2-line LCD screen
- Free downloadable basic software
Please download the datasheet here. (pdf)
CTV210-R, KIMO Air velocity and temperature sensor
Kimo’s CTV 210-R is a transmitter with hotwire probe measuring air velocity from 0 to 30 m/s and temperature from 0 to +50°C.
Measure prarameter: Air Velocity & Temperature
FEATURES
- Measuring ranges: air velocity: from 0 to 30 m/s
- Temperature : 0 à +50 °C
- With or without 2-line 19-digits LCD display
- Two relays
- 0-5/10 V or 0/4-20 mA outputs
- Adjustment certificate
Please refer to product’s datasheet (PDF)
AMI 310, KIMO Multifunction Meter
For air parameters measurements. AMI 310 measures, records up to 500 campaigns of 20000 points a day on a SD card and can restore on PC via USB until 6 simultaneous parameters according to the applications: Pressure, Temperature (Pt100 and thermocouple), Humidity, Air Quality ( CO / CO2), Air Velocity and Airflow (vane probes and hotwire), Tachometry.
FEATURES
- Measurement of hygrometry, temperature, CO2, CO, air velocity, airflow,
pressure, tachometry (depending on model and probe) - 2 inputs for Pt100 temperature (from -200 to 600°C), interchangeable modules
- Up to 6 simultaneous measurements with large colour display
- Expandable memory with micro-SD card
- Interchangeable modules. 1 device = several possible ranges and parameters
- Device/probe wireless connection
- SMART-2014 System – wireless and wired probes automatically recognised
Please refer to the product’s datasheet (pdf).
DBM 620, KIMO Air Flow Meter
Kimo DBM 620 Air Flow Meter is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings from air vents.
FEATURES
- Simultaneous display of up to 4 parameters. Choose between airflow, humidity, atmospheric pressure, temperature, differential pressure and air velocity
- Simultaneous display of air flow and temperature, automatic airflow direction (extraction or air blast)
- Automatic averaging or point by point averaging, HOLD function
- Removable measuring unit (micromanometer function)
- Display on smartphone or tablet by Bluetooth connection
- Standard accessories: 610 x 610mm hood with flow straightener and flodable frame, 2 x 0.80 m of silicone tube, 1 Removable measuring unit with Bluetooth® connection, 1 Base including the measurement grid and a temperature and hygrometry probe, a transport case and a calibration cert.
Available Hoods
DBM 620 air flow meter comes in standard with a 610 x 610mm hood. 4 other hoods are available as options:
• 1020 x 1020 mm
• 720 x 720 mm
• 720 x 1320 mm
• 420 x 1520 mm
MEASURING RANGES
-
Portata (parametro calcolato) : 35.00 m³/h … 4250.00 m³/h
-
Velocità (parametro calcolato) : 0.20 m/s … 10.00 m/s
-
Temperatura (NTC) : -20.00 °C … 70.00 °C
-
Umidità relativa (sensore capacitivo) : 0.00 % RH … 100.00 % RH
-
Pressione atmosferica : 700.00 hPa … 1100.00 hPa
-
Pression : -2500.00 Pa … 2500.00 Pa
The DBM 620 Air Flow Meter comes equipped with the SmartKap mobile app. You can use SmartKap to connect to your DBM 620 via the Bluetooth® protocol, allowing you to configure the device, as well as visualize and save its measurements.
Please refer to the product’s datasheet (pdf).
LV110, KIMO Thermo Anemometer with Vane Probe
FEATURES
- The anemometer display velocity and temperature measurements
- Selection of units (air velocity, airflow and temperature)
- Display max / min values and hold function is available
- Dimensions of rectangular and circular duct
- Detection of flow direction
Available model based on measuring ranges as below:
-
LV 110 : 0.30 m/s … 35.00 m/s
-
LV 111 : 0.80 m/s … 25.00 m/s
-
LV 117 : 0.40 m/s … 35.00 m/s
-
LV 110- LV111-LV 117 : 0.00 m³/h … 99999.00 m³/h
-
LV 110- LV111-LV 117 : -20.00 °C … 80.00 °C
Please refer to the product’s datahseet (pdf).
LV 130, KIMO Thermo-anemometer with Integrated Vane Probe
The Kimo LV 130 precisely measures air velocity and ambient temperature with a rotating vane probe.
FEATURES
- Precisely measures air velocity and ambient temperature with a rotating vane probe
- Selection of units (air velocity, airflow and temperature)
- Display max / min values with hold function
- Detection of flow direction
- Airflow calculation and automatic average
MEASURING RANGES
-
Velocity : 0.30 m/s … 35.00 m/s
-
Airflow : 0.00 m³/h … 99999.00 m³/h
-
Temperature : 0.00 °C … 50.00 °C
Please refer the product’s datasheet (pdf).
VT 110 / VT 115, KIMO Hotwire thermo-anemometer
Kimo’s VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe.
FEATURES
- Perfect for measuring airflow, air velocity and temperature with its hot wire probe
- Display max / min values
- Airflow calculation with cone
- Dimensions of rectangular and cicular duct
- Air velocity compensation in atmospheric pressure
MEASURING RANGES
-
Velocity : 0.15 m/s … 30.00 m/s
-
Airflow : 0.00 m³/h … 99999.00 m³/h
-
Temperature : -20.00 °C … 80.00 °C
Please refer to the product’s datasheet (pdf).
VT 210, KIMO Thermo-hygrometer-anemometer
Multifunction device specially designed for the control of the ventilation systems, allowing to measure the air velocity, the airflow and the temperature in duct.
Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts.
FEATURES
- Up to 6 simultaneous measurements
- Besides speed measurement probes (vanes, hotwire or omnidirectionnal), a hygrometry probe or climatic condition and temperature module is also accepted
- Several packs available for different applications:
- With vane probe (100mm / 70mm / 14mm) telescopic tilting in 90 ° or standard
- With telescopic hotwire probe tilting in 90 ° or standard
- Optional: wired or radio temperature probe and humidity probe
- Memory capacity: Up to 1000 dataset of 20 000 points
- Interchangeable measurement modules
- 2 inputs fot Pt100 temperature (from -200 to +600°C)
- Device/probe wireless communication
MEASUREMENT RANGES
- Velocity : from -5 to 35 m/s
- Airflow : from 0 to 99 999 m3/h
- Integrated temperature of measurement probes : -20 to 80°C
Please refer to the product’s datasheet (pdf)