Pressure level transmitter 711
The level sensing pressure transmitters of type 711 with a relative pressure measuring cell have an adjusted and amplified sensor signal. Cable length from 3 to 300 meters as well as ex-versions and versions with drinking water approval are available.
FEATURES
- Ex-version available
- High accuracy
- Large variety of cable length (3 to 300m)
- Low pressure ranges
- Sea water resistant
SPECIFICATIONS
- Medium : Fluides
- Pressure range : 0…0.1 – 16 bar
- Output : 4…20 mA
- Accuracy : <0.3% fs
- Electrical connection : Cable in several lengths
Please refer to the product’s datasheet here. (pdf)
Differential pressure transmitter 699
These pressure transmitters type 699 are available in switchable pressure ranges and with digital device or Modbus. The full-version includes customer specific adjustment possibilities. Especially developed sensors for each pressure range allow a physically correct and long term stable measurement.
The large variety offers a manifold use in the air-conditioning technique as well as for fine measurement in industry or medical applications.
FEATURES
- Available with or without LCD display
- Adjustable measurement range
- Switchable output signals
- Switchable response curve (linear or root-extracted)
- Full scale adjustable
- Application at over and low pressure range possible
- Fast, easy mounting. Housing incorporates integral bracket for wall or ceiling mouting
- Resettable Zero Point (Reset button)
SPECIFICATIONS
- Medium : Air and neutral gases
- Pressure range : -1…1 mbar / 0…0.3 – 50 mbar
- Output : 0…10V, 0…20 mA, 4…20 mA
- Accuracy : <0.5% fs
- Electrical connection : Screw terminals
- Pressure connection : Hose connector Ø 6.2mm
- Screw mounting
Please refer to the product’s datasheet here. (pdf)
Differential pressure transmitter 692
The pressure transmitter of type 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application-specific pressure and electrical connections and housing materials suitable for different media can be provided.
FEATURES
- Very low temperature sensitivity
- High resistance to extreme temperatures
- No mechanical creepage
- Modular system and choice of materials to suit individual applications
SPECIFICATIONS
- Medium : Liquids and gases
- Pressure range : 0…0.1 – 25 bar
- Output : 0…5V, 0…10V, 4…20mA
- Accuracy : <0.5% fs
- Electrical connection : Cable 1.5m, connector DIN EN 175301-803-A, connector DIN EN 60130-9
- Pressure connection : Hose connection or screw fitting, outside thread, adapter inside and outside thread
- Mounting bracket for screw mounting
Please refer to the product’s datasheet here. (pdf)
Pressure sensor 520
The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. This pressure transmitter meets the high burst protection demands and is suitable for the use in all types of refrigerants inclusive ammonia.
Features
- Compact, rugged construction
- Welded without sealing parts, no elastomer seals
- Large selection of connections available
- Saving time by quick cable mounting by the customer with swift connector
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : -1 … 9 bar / 0 … 2.5-1000 bar
- Output : 0…5V, 1…6V, 0…10V, ration. 10…90%, 4…20mA
- Accuracy : typ. <0.3% FS
- Electrical connection : Swift connector, metri pack, connector DIN 175301-803-A or C, M12x1, braids, connector RAST 2.5
- Pressure connection : Inside thread or outside thread
Pressure sensor 522 for shipbuilding
The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.
The pressure measuring cell incorporates a fully welded construction within the transducer housing. Highest requirements in various applications concerning burst can be met.
All pressure transmitters of type 522 have the most important certifications for the shipbuilding industry.
FEATURES
- Compact, rugged construction
- Welded without sealing parts
- Certified for shipbuilding with : Germanischer Lloyd; American Bureau of Shipping; Bureau Veritas; Det Norske Veritas; Lloyd’s Register
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : 0 … 2.5 – 600 bar
- Output : 0 … 10V, 4 … 20mA
- Accuracy : typ. < 0.3% FS
- Electrical connection : Connector DIN 175301-803-A, M12 x 1, swift connector
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
DOS 001 – Stiko Deadweight Testers
High accuracy deadweight tester with an accuracy of 0.01% of reading.
- Two 4-wire analogue output 0-5/10 V or 0/4-20 mA
- ABS housing IP 65, with or without 2-lines 19-digits LCD display, 2 relays, software or keyboard
configuration - Quick and easy mounting with the 1/4 turn system with wall-mount plate
- Configurable air velocity range from 0 to 30 m/s with hotwire probe
Please refer to product’s datasheet (PDF)
TS40P, Taishio Pneumatic Pressure Handpump
- Pressure to 40 Bar, vacuum better than 0.95 bar
- Through hand operated scissors action pump
- With 1m flexible hose with 1/4″ BSP (F) swivel adaptor for connecting the test instrument
- Combination of vacuum and pressure
Please refer to product’s datasheet (PDF)
MGF16BN – Meriam Digital Pressure Gauge (Medical)
The MGF16BN digital pressure gauge is designed to handle the demands of pressure measurement. Pressure ranges are available to 5 000 PSIG at standard accuracy of ± 0.25 % of full scale or higher accuracy of ± 0.1 % of full scale.
The display is a 4 digit LCD with 0.5″ high numerals and a lower alphanumeric display for engineering units to aid in set up. Each gauge includes up to 15 selectable engineering units depending on the sensor range. The gauge is powered by two AA alkaline batteries.
- ±0.25% Test Gauge Accuracy
- 316L Stainless Steel Wetted Parts
- NEMA 4X
- Capture Minimum and Maximum Readings
- Push Button Zero
- Selectable Engineering Units
- Selectable Auto Shutoff Times
Please refer to product’s datasheet (PDF)
TS-DPG-110, Taishio High Accuracy Digital Pressure Gauge
High-precision pressure sensor 0.2% FS accuracy
- 4-digit LCD showing the pressure reading accurately in real time
- Different pressure units to choose from, zero clearing, backlight on/off
- Display units: kPa, PSI, kg/cm2, Bar, MPa
- Battery-powered, low-power design
- High-precision pressure sensor 0.2%FS
- Overload Capacity 150%
- Operating Temperature 0 to 40°C
Please refer to product’s datasheet (PDF)
C310 – Kimo Multifunction Sensor
Kimo’s C 310 is a multifunction sensor with interchangeable probes. It can display and measure four parameters simultaneously.
FEATURES
- Two inputs for probes
- Four visual and audible alarms
- Two analogue outputs 0-5/10 V or 0/4-20 mA
- Four RCR relays (option)
- Ethernet communication (option) and RS485 MODBUS (option)
- Adjustment certificate
Please download the datasheet here.
Sale
Pressure sensor 528
10$
The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These pressure transmitters are suitable for applications across a broad spectrum of industries.
FEATURES
- Compactt, rugged construction
- Negligible temperature influence on accuracy
- Large selection of connections available
- Saving time by quick cable mounting by the customer with swift connector
SPECIFICATIONS
- Medium : Liquids and gases
- Pressure range : -1 … 0-60 bar
- Output :0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA, ratiom. 10 … 90%
- Accuracy: typ. <0.3% fs
- Electric connection : Swift connector, metri pack, M12 x 1, connector DIN 175301-803-A or C, braids, connector RAST 2.5
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
Sale
Mechanical Pressure Switch 625
10$
Type 625 pressure switches, with 13 pressure ranges, are suitable for liquids and gases. Body materials are available in plastic, brass and aluminium, with a choice of NBR, FPM, EPDM and silicone diaphragms. Very high precision through finely tuned measurement stages and high longterm stability. Rugged design and especially suitable for use in general industrial equipment construction, process technology and food automation.
FEATURES
- High accuracy by 13 ideally designed pressure range increments
- Switching differences adjustable
- High long term stability with repro ducibility of switching points < ±0.3 mbar
- Customer specific switching points adjustable in factory
- Compact, rugged construction
- Ideal price / performance ratio
SPECIFICATIONS
- Medium : Liquids and neutral gases
- Pressure range : -900 … 6000 mbar
- Electrical connection : Screw terminals, flat connector 6.3 mm
- Pressure connection : Inside thread M5, hose connector ± 6 mm, outside thread
- Mounting bracket
Please refer the datasheet here. (pdf)