Model 989, Isotech Black Body Source
Model: Black Body Source, 989
It was used to increase the accuracy of thermal imagers measuring human skin temperature in temperature screening of applications. It can also be used to check non-contact clinical thermometers. The upgraded controller can either be locked to a single temperature or it can be adjusted over a new wider temperature range of 20°C to 50°C. Model 989 also has a PC
interface fitted as standard. It allows the temperature to be both monitored and adjusted from a PC.
Please refer to product’s datasheet (PDF)
- Improves accuracy of Fever Detection Systems
- Covers 20°C to 50°C with Fast Thermal Response
- Check Non-Contact Thermometers
- The blackbody can maintain its set point in high ambient temperature conditions and it can also operate below the ambient temperature
Sale
MP-100KT Calibration Pump
10$
Model: MP100KT Calibration Pressure Pump kit
Impressive Accuracy
- MV-100 0-28″Hg (depends on barometric pressure)
- MP-100 0 to 100 psi (including and not limited to an inch of water)
- Connections (2 ports) 1/8 inch NPT
- Weight 1.5lbs
- 2ft hose and 1/4 inch fitting
Please refer to product’s datasheet (PDF)
MPG 7000 Plus – MeriGauge® Plus Digital Pressure Gauge
Model: MPG 7000 Plus
The MPG7000 Plus is a digital pressure gauge with inter-changable sensors, allowing flexibility to the user, sensors contain the calibration, various types and ranges.
- 10 Interchangeable Smart Sensor Modules
- Compound gauge pressure range -14.5 to 3000 PSIG
- Ranges 15-3000 psi
- Gauge works with all meriSense sensors
- Up to 32 engineering units
- Fully configurable via meriLink™ PC Software
- Update rate, 5 measurements per second
- Standard delivery: Meriam MPG7000 Plus Digital Pressure Gauge, Sensor module 0-300 PSIG
- Intrinsically Safe, IP 66
Please refer to product’s datasheet (PDF)
Orion 796, ISOTECH Stirred Liquid Baths
Model: Orion 796
The Orion calibration baths o er deeper calibration volumes than the Isotech Hydra series with world class temperature stability. There is a high temperature model (30°C to 300°C) and a model with built in refrigeration (-40°C to 125°C).
These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.
Three model available with ±0.006°C accuracy:
- Model: 796L (-80°C – 125°C)
- Model: 796M (-40°C – 125°C)
- Model: 796H (-30°C – 300°C)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 485 x 525 x 1150
Sale
Pegasus 4853 – Isotech Dry Block Calibrator
10$
Model: Pegasus 4853 Series
- High Temperature Thermocouple Calibration Furnace
- Custom Furnace Design with Optimised Profile
- Calibrate Whole Measurement Loop
Temperature range of 150°C to 1200°C with accuracy of :
- ±0.1°C @ 150°C and ±0.2°C @ 1200°C stability (Basic & Site models)
- ±0.05°C @ 150°C and ±0.08°C @ 1200°Cstability (Advanced model)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 384 x 212 x 312
Pegasus R, Isotech Black Body Source
Model: Pegasus R 970
High temperature blackbody source, 150°C to 1200°C with accuracy of ±0.1°C
- Portable black body calibration source for radiation pyrometers
- Laboratory performance and low certainty calibrations
- Built-in temperature indicator and included platinum resistance thermometer
- Excellent temperature uniformity
Please refer to product’s datasheet (PDF)
Pegasus-T, Dry Blocks and Portable Baths
A New Solution…to Calibrate Short Sensors at High Temperatures
The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designed for fast heating and finds applications in the glass, electrical power, automotive and material processing industries.
The Pegasus-T is the latest member of the Pegasus family developed for sensors that are simply too short to be calibrated in the Pegasus 4853 or other conventional calibration furnaces.
The advanced control system allows the user to select optimal performance for sensors immersed at 25mm, 35mm or 50mm with three independent control loops. It also has built in over-temperature protection to protect the heater wire from over temperature thus increasing life expectancy.
Advanced Features
Fully featured high resolution display with advanced control features including multi loop control with autotune, adjustable temperature alarms with control from internal or external thermocouples
- Temperature Programmer
Create, Edit and Store automatic programs for temperature stepping - Reference Channel Input
Can be used for external control or as a reference input. A Type R Thermocouple, Model 935-14-91 is included with each Pegasus-T - Ethernet Interface
Free Software, I-Cal Easy Log – web download - Offset Elimination
Connect the external reference probe and the calibrator can trim the block temperature to remove offsets - USB Port
Export logged data to a USB Key, controller data is continuously logged
Please download the datasheet here (pdf).
QuickCAL – Isotech Portable Dry Block Temperature Calibrator
Two models available:
QuickCal 550: 30° to 350°C;
QuickCal 560: -12° to 140°C
- Accuracy: 0.4°C to 0.2°C, using comparison techniques
- Wide temperature ranges: covers most critical test points
- Light 1.5kg, compact, portable and fast: nine minutes to reach temperature
- Interchangeable inserts: have one unit with multiple inserts to suit different sensor diameters
Please download product’s datasheet here. (pdf)
RH CAL, Portable Relative Humidity Calibrator
Model: RH CAL
A microprocessor based, programmable humidity calibration system that is at home in the metrology lab or in the field performing on-site, NIST traceable humidity calibrations.
RH CAL is entirely self-sufficient. It does not need compressed air or a water connection to operate, which allows this system to be truly portable.
- Measurement Ranges:
Relative humidity: 5 to 95%
Temperature: 10°C to 50°C
Dew/Frost Point: -40°C to 60°C with D2 sensor
- Accuracy:
Relative humidity: ±0.5%
Temperature: ±0.1°C
Dew/Frost Point: ±0.2°C nominal
Please refer to product’s datasheet (PDF)
Sale
Thermys 150 – AOIP Advanced Field Reference Thermometer / Temperature Calibrator
10$
Model: Thermys 150
THERMYS 150 is an all-in-one high accurate documenting field reference thermometer for thermocouples (14 types),resistive probes (12 types) and thermistors with a high accuracy of up to 0.005% RDG.
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 210 x 110 x 50
TS-DPG-110, Taishio High Accuracy Digital Pressure Gauge
High-precision pressure sensor 0.2% FS accuracy
- 4-digit LCD showing the pressure reading accurately in real time
- Different pressure units to choose from, zero clearing, backlight on/off
- Display units: kPa, PSI, kg/cm2, Bar, MPa
- Battery-powered, low-power design
- High-precision pressure sensor 0.2%FS
- Overload Capacity 150%
- Operating Temperature 0 to 40°C
Please refer to product’s datasheet (PDF)
TS40P, Taishio Pneumatic Pressure Handpump
- Pressure to 40 Bar, vacuum better than 0.95 bar
- Through hand operated scissors action pump
- With 1m flexible hose with 1/4″ BSP (F) swivel adaptor for connecting the test instrument
- Combination of vacuum and pressure
Please refer to product’s datasheet (PDF)