CA310, Multifunction Sensor with Large Electroluminescent Display
Kimo’s CA 310 contains a multifunction sensor with interchangeable probes and a large display. It can measure three parameters (for example humidity, temperature and pressure).
FEATURES
- Alternating display of one to three parameters
- One input for an interchangeable probe
- Location for SPI-2 or MVA interchangeable board
- Three audible and visual (dual-color LEDs) alarms
- Three analogue outputs (4 wires) 0/5-10 V or 0/4-20 mA and three reverse relays
- Adjustment certificate
MEASURE DETAILS
-
Units : °C, % RH, Pa, ppm, m/s, hPa, mA, V, m³/h
-
Alarm : 3 visual and audible alarm
Please refer to the product’s datasheet here. (pdf)
High Accuracy Digital Pressure Gauge, SPMK 700
High accuracy digital pressure gauge – Standard pressure gauge for calibration.
SPECIFICATIONS
- Pressure range: to 36,000 psi (2500 bar)
- Accuracy: ±0.02%FS, ±0.05%FS, ± 0.1%FS , ±0.2%FS optional
- Connector: Based M20X1.5 ,optional
- Application: used with calibration pump
- Accessories: sealing rings
- Weight: 0.7kg
- Dimension: 120x45mm
- Communication: RS232
- Power: battery or adaptor
- Screen: big screen with back light
Please refer to the product’s datasheet here. (pdf)
Pressure level transmitter 711
The level sensing pressure transmitters of type 711 with a relative pressure measuring cell have an adjusted and amplified sensor signal. Cable length from 3 to 300 meters as well as ex-versions and versions with drinking water approval are available.
FEATURES
- Ex-version available
- High accuracy
- Large variety of cable length (3 to 300m)
- Low pressure ranges
- Sea water resistant
SPECIFICATIONS
- Medium : Fluides
- Pressure range : 0…0.1 – 16 bar
- Output : 4…20 mA
- Accuracy : <0.3% fs
- Electrical connection : Cable in several lengths
Please refer to the product’s datasheet here. (pdf)
Differential pressure transmitter 699
These pressure transmitters type 699 are available in switchable pressure ranges and with digital device or Modbus. The full-version includes customer specific adjustment possibilities. Especially developed sensors for each pressure range allow a physically correct and long term stable measurement.
The large variety offers a manifold use in the air-conditioning technique as well as for fine measurement in industry or medical applications.
FEATURES
- Available with or without LCD display
- Adjustable measurement range
- Switchable output signals
- Switchable response curve (linear or root-extracted)
- Full scale adjustable
- Application at over and low pressure range possible
- Fast, easy mounting. Housing incorporates integral bracket for wall or ceiling mouting
- Resettable Zero Point (Reset button)
SPECIFICATIONS
- Medium : Air and neutral gases
- Pressure range : -1…1 mbar / 0…0.3 – 50 mbar
- Output : 0…10V, 0…20 mA, 4…20 mA
- Accuracy : <0.5% fs
- Electrical connection : Screw terminals
- Pressure connection : Hose connector Ø 6.2mm
- Screw mounting
Please refer to the product’s datasheet here. (pdf)
Differential pressure transmitter 692
The pressure transmitter of type 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application-specific pressure and electrical connections and housing materials suitable for different media can be provided.
FEATURES
- Very low temperature sensitivity
- High resistance to extreme temperatures
- No mechanical creepage
- Modular system and choice of materials to suit individual applications
SPECIFICATIONS
- Medium : Liquids and gases
- Pressure range : 0…0.1 – 25 bar
- Output : 0…5V, 0…10V, 4…20mA
- Accuracy : <0.5% fs
- Electrical connection : Cable 1.5m, connector DIN EN 175301-803-A, connector DIN EN 60130-9
- Pressure connection : Hose connection or screw fitting, outside thread, adapter inside and outside thread
- Mounting bracket for screw mounting
Please refer to the product’s datasheet here. (pdf)
Pressure sensor 520
The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. This pressure transmitter meets the high burst protection demands and is suitable for the use in all types of refrigerants inclusive ammonia.
Features
- Compact, rugged construction
- Welded without sealing parts, no elastomer seals
- Large selection of connections available
- Saving time by quick cable mounting by the customer with swift connector
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : -1 … 9 bar / 0 … 2.5-1000 bar
- Output : 0…5V, 1…6V, 0…10V, ration. 10…90%, 4…20mA
- Accuracy : typ. <0.3% FS
- Electrical connection : Swift connector, metri pack, connector DIN 175301-803-A or C, M12x1, braids, connector RAST 2.5
- Pressure connection : Inside thread or outside thread
Pressure sensor 522 for shipbuilding
The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.
The pressure measuring cell incorporates a fully welded construction within the transducer housing. Highest requirements in various applications concerning burst can be met.
All pressure transmitters of type 522 have the most important certifications for the shipbuilding industry.
FEATURES
- Compact, rugged construction
- Welded without sealing parts
- Certified for shipbuilding with : Germanischer Lloyd; American Bureau of Shipping; Bureau Veritas; Det Norske Veritas; Lloyd’s Register
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : 0 … 2.5 – 600 bar
- Output : 0 … 10V, 4 … 20mA
- Accuracy : typ. < 0.3% FS
- Electrical connection : Connector DIN 175301-803-A, M12 x 1, swift connector
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
BG52, Blue Gizmo Multifunction Infrared Thermometer
Suitable for AC/building inspect application to check if it is thermal bridge, thermal bypass and cause the heat loss.
FEATURES
- With Thermal Bridge Detector
- With Mold Warning Detector
- 8 Beam Laser
- With RH, Dewpoint, Wet and Dry Bulb
- With Internal Memory
Please refer to the product’s datasheet here. (pdf)
BG55, Infrared Thermometer with K-Type thermocouple built-in-jack
FEATURES
- High / Low Alarm
- MIN, MAX, AVG functions
- Adjustable Emissivity
- Compact and easy to carry
- Large LCD Display
- Built-in K-Type thermocouple socket
- Circle Laser
- Point and Shoot Concept
APPLICATIONS
- Electrical troubleshooting
- Automotive repair and maintenance
- Air conditioner
- Science experiment
- Manufacturing processes of semiconductor technology
- Food safety and processing
- Perform HVAC energy audits
Type-K thermocouple is available upon request
Please refer to the product’s datasheet here. (pdf)
BG325, Blue Gizmo Sound Level Meter (IEC 651 Type II)
Features
- Mini Size
- Newly Design Shape
- Low Cost High Performance
- MAX/MIN Function
- Level Range Display
- AC Signal Output
- Resolution 0.1 dB
- IEC 651 Type II
Please refer to the product’s datasheet here. (pdf)
Center 32, Sound Level Meter (IEC 61672-1 class 2, Economy)
FEATURES
- 60dB Dynamic Space In Each Range
- Time Weighting Fast/Slow
- Frequency Weighting A/C
- Max/Min Function
- Complies With IEC 61672-1 Class 2 Standard
SPECIFICATIONS
- Measurement Range: 30~130dB
- Level Range: 30~90dB, 50~110dB, 70~130dB
- Accuracy: ±1.4dB (ref. 94dB@1KHz)
- Frequency Weighting: A / C
- Time Weighting: Fast, Slow
- Frequency Range: 20Hz to 8KHz
- Microphone: ½ inch Electret condenser microphone
- Auxiliary Outputs: AC/DC Output
- Battery: 9V battery
- Dimensions: 258x55x25 mm
- Weight: Approx.185g
Please refer to the product’s datasheet here. (pdf)
CENTER 390, Datalogger Sound Level Meter (IEC 61672-1 class 2)
FEATURES
- Complies With IEC 61672-1 Class 2 Standard
- 32Resolution 0.1 dB
SPECIFICATION
- Level Range: 30~130dB
- Accuracy: ±1.4dB (ref. 94dB@1KHz)
- Frequency Weighting: A / C
- Time Weighting: Fast, Slow
- Frequency Range: 20Hz to 8KHz
- Microphone: ½ inch Electret condenser microphone
- Auxiliary Outputs: AC/DC Output
- Battery: 1.5V AA size battery x 4
- Dimensions: 272x83x42 mm
- Weight: Approx.390g
Please refer to the product’s datasheet here. (pdf)