Hydra 798 – ISOTECH Stirred Liquid Baths
Model: Hydra 798
Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. This gives the smallest overall uncertainties.
The cooling is built-in and also surrounds the calibration volume creating a low temperature ambient in which the heater can function efficientlys. A unique cooling system cools the unit as well as enabling the bath to heat up to 125°C (121°C is a key sterilization temperature).
Three model available:
- Model: 798L (-80°C – 125°C) with ±0.030°C accuracy
- Model: 798M (-40°C – 125°C) with ±0.017°C accuracy
- Model: 798H (-30°C – 300°C) with ±0.015°C accuracy
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 405 x 610 x 940
Orion 796, ISOTECH Stirred Liquid Baths
Model: Orion 796
The Orion calibration baths o er deeper calibration volumes than the Isotech Hydra series with world class temperature stability. There is a high temperature model (30°C to 300°C) and a model with built in refrigeration (-40°C to 125°C).
These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.
Three model available with ±0.006°C accuracy:
- Model: 796L (-80°C – 125°C)
- Model: 796M (-40°C – 125°C)
- Model: 796H (-30°C – 300°C)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 485 x 525 x 1150
DewMaster Chilled Mirror Hygrometer
A fast, multi-function, high precision chilled mirror hygrometer for continuously monitoring the dew/frost point temperature, parts per million water vapor by volume or percent relative humidity in gas streams.
The DewMaster is a laboratory grade, high precision, field proven instrument with multiple available sensor configurations and wide applicability to fit all budgets.
- Measurement Ranges and PPMv Ranges:
0 to 100% RH with all sensors, non-condensing conditions
0 to 999,999 PPMv with all sensors, non-condensing conditions
- Accuracy:
±0.2°C (0.36°F) dew/frost point standard
±0.1°C (0.18°F) dew/frost point optional
±0.5% of full scale pressure
- Air Temperature Sensor Range:
-100 to 250°C (-148 to 482°F)
±0.1°C accuracy
Please refer to product’s datasheet (PDF)
RH CAL, Portable Relative Humidity Calibrator
Model: RH CAL
A microprocessor based, programmable humidity calibration system that is at home in the metrology lab or in the field performing on-site, NIST traceable humidity calibrations.
RH CAL is entirely self-sufficient. It does not need compressed air or a water connection to operate, which allows this system to be truly portable.
- Measurement Ranges:
Relative humidity: 5 to 95%
Temperature: 10°C to 50°C
Dew/Frost Point: -40°C to 60°C with D2 sensor
- Accuracy:
Relative humidity: ±0.5%
Temperature: ±0.1°C
Dew/Frost Point: ±0.2°C nominal
Please refer to product’s datasheet (PDF)
TH110 – Kimo Humidity and Temperature Sensor
Kimo’s TH 110 measured humidity and temperature from 5 to 95% RH and from 0 to 50°C.
- Measuring range from 5 to 95% RH and from 0 to 50°C (ambient model) or from -20 to +80°C (duct or remote model)
- 0-10 V output or 4-20 mA output
- With or without 10-digits LCD display
- Housing with simplified mounting system
- Software or DIP switch configuration
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here.
TH210 – Kimo Humidity and Temperature Sensor
Kimo’s TH 210-R measures humidity and temperature including 0 to 100 % RH and -20 to +80°C (ambient model), -20 to +80°C (pc remote probe), and -40 to +180°C (stainless steel remote probe).
- Stainless steel or polycarbonate probe
- With or without 2-line 19-digits LCD display
- 0-5/10 V or 0/4-20 mA outputs
- Trend indicator
- Two relays
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here. (pdf)
C310 – Kimo Multifunction Sensor
Kimo’s C 310 is a multifunction sensor with interchangeable probes. It can display and measure four parameters simultaneously.
FEATURES
- Two inputs for probes
- Four visual and audible alarms
- Two analogue outputs 0-5/10 V or 0/4-20 mA
- Four RCR relays (option)
- Ethernet communication (option) and RS485 MODBUS (option)
- Adjustment certificate
Please download the datasheet here.
HM70 – Handheld Humidity and Temperature Meter
Vaisala HUMICAP® HM70 Handheld is designed for demanding humidity measurement in spot-checking applications. It is also ideal for field checking and calibration of Vaisala’s fixed humidity instruments.
The HM70 includes an MI70 indicator and an optional probe depending on the application.
- HMP75 with standard plastic grid
- HMP75B (chemical purge and sensor preheating)
- HMP76 with standard sintered bronze filter
- HMP76B (chemical purge and sensor preheating)
- HMP77 with standard plastic grid and stainless steel netting
- HMP77B (chemical purge and sensor preheating)
Please download the datasheet here. (pdf)