MGF16BN – Meriam Digital Pressure Gauge (Medical)
The MGF16BN digital pressure gauge is designed to handle the demands of pressure measurement. Pressure ranges are available to 5 000 PSIG at standard accuracy of ± 0.25 % of full scale or higher accuracy of ± 0.1 % of full scale.
The display is a 4 digit LCD with 0.5″ high numerals and a lower alphanumeric display for engineering units to aid in set up. Each gauge includes up to 15 selectable engineering units depending on the sensor range. The gauge is powered by two AA alkaline batteries.
- ±0.25% Test Gauge Accuracy
- 316L Stainless Steel Wetted Parts
- NEMA 4X
- Capture Minimum and Maximum Readings
- Push Button Zero
- Selectable Engineering Units
- Selectable Auto Shutoff Times
Please refer to product’s datasheet (PDF)
Sale
MH-10KT Hydraulic Pressure Kit / Pump
10$
Model: MH10-KT Hydraulic Calibration Pump Kit, 0 to 10,000 PSIG Range
Wide Pressure Range
- 0 – 10,000 psi (700 Bar)
- Compatible with most hydraulic fluids, oils and water
- Connections (2 ports) 1/4 inch NPT/BSP
Please refer to product’s datasheet here. (PDF)
MicroK, Isotech Precision Thermometry Bridge
Model: MicroK
The microK family of precision thermometry bridges use a completely new measurement technique to achieve accuracies to better than 0.02ppm.
- Supports SPRTs, IPRTs, Thermistors and Thermocouples
- High accuracy thermocouple measurements with a voltage uncertainty of <0.25μV
- Can display in °C, °F, K, ratio, resistance, voltage with numeric and graphical display
modes - Simple Touch Screen operation with easy to use interface and data logging options
- Can connect USB Memory Stick, Keyboard, Mouse
- No PC needed, the display can show temperature and resistance in addition to ratio
Please refer to product’s datasheet (PDF)
MilliK, ISOTECH Precision Thermometer
Model: MilliK
A high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to 1820°C
- Has two input channels for sensors and a third channel for current
- The milliK can control Isotech temperature sources, sequencing through
a programmable list of temperature set points and log data to internal memory or
a USB drive. - Can display in °C, °F, K, Ohms, mV and mA with numeric and graphical display modes
- High Accuracy < ±5ppm for PRTs, ±2μV for Thermocouples and ±1μA Transmitters
Please refer to product’s datasheet (PDF)
Model 989, Isotech Black Body Source
Model: Black Body Source, 989
It was used to increase the accuracy of thermal imagers measuring human skin temperature in temperature screening of applications. It can also be used to check non-contact clinical thermometers. The upgraded controller can either be locked to a single temperature or it can be adjusted over a new wider temperature range of 20°C to 50°C. Model 989 also has a PC
interface fitted as standard. It allows the temperature to be both monitored and adjusted from a PC.
Please refer to product’s datasheet (PDF)
- Improves accuracy of Fever Detection Systems
- Covers 20°C to 50°C with Fast Thermal Response
- Check Non-Contact Thermometers
- The blackbody can maintain its set point in high ambient temperature conditions and it can also operate below the ambient temperature
Sale
MP-100KT Calibration Pump
10$
Model: MP100KT Calibration Pressure Pump kit
Impressive Accuracy
- MV-100 0-28″Hg (depends on barometric pressure)
- MP-100 0 to 100 psi (including and not limited to an inch of water)
- Connections (2 ports) 1/8 inch NPT
- Weight 1.5lbs
- 2ft hose and 1/4 inch fitting
Please refer to product’s datasheet (PDF)
MPG 7000 Plus – MeriGauge® Plus Digital Pressure Gauge
Model: MPG 7000 Plus
The MPG7000 Plus is a digital pressure gauge with inter-changable sensors, allowing flexibility to the user, sensors contain the calibration, various types and ranges.
- 10 Interchangeable Smart Sensor Modules
- Compound gauge pressure range -14.5 to 3000 PSIG
- Ranges 15-3000 psi
- Gauge works with all meriSense sensors
- Up to 32 engineering units
- Fully configurable via meriLink™ PC Software
- Update rate, 5 measurements per second
- Standard delivery: Meriam MPG7000 Plus Digital Pressure Gauge, Sensor module 0-300 PSIG
- Intrinsically Safe, IP 66
Please refer to product’s datasheet (PDF)
Orion 796, ISOTECH Stirred Liquid Baths
Model: Orion 796
The Orion calibration baths o er deeper calibration volumes than the Isotech Hydra series with world class temperature stability. There is a high temperature model (30°C to 300°C) and a model with built in refrigeration (-40°C to 125°C).
These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.
Three model available with ±0.006°C accuracy:
- Model: 796L (-80°C – 125°C)
- Model: 796M (-40°C – 125°C)
- Model: 796H (-30°C – 300°C)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 485 x 525 x 1150