Gemini 4857 – Isotech Dry Block Calibrator
Model: Gemini 4857 Series
- Calibrate Large Diameter Probes
- High Capacity Blocks 64 x 160mm
- Calibrate Whole Measurement Loop
Temperature range of 35°C to 550°C with accuracy of:
- ±0.02°C @ 50°C, ±0.03°C @ 250°C and ±0.04°C @ 550°C (Basic & Site models)
- ±0.05°C @ 150°C, ±0.015°C @ 300°C and 0.03°C @ 550°C (Advanced model)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 384 x 212 x 312
Jupiter 4852 – Isotech Dry Block Calibrator
Model: Jupiter 4852
- Wide Operating Range to 660°C
- Fast Response
- Calibrate Whole Measurement Loop
Temperature range of 35°C to 660°C with accuracy of:
- ±0.02°C @ 100°C and ±0.03°C @ 650°C stability (Basic & Site models)
- ±0.015°C @ 100°C and ±0.025°C @ 650°C stability (Advanced model)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 384 x 212 x 312
MP-100KT Calibration Pump
Model: MP100KT Calibration Pressure Pump kit
Impressive Accuracy
- MV-100 0-28″Hg (depends on barometric pressure)
- MP-100 0 to 100 psi (including and not limited to an inch of water)
- Connections (2 ports) 1/8 inch NPT
- Weight 1.5lbs
- 2ft hose and 1/4 inch fitting
Please refer to product’s datasheet (PDF)
M-600KT Combo Pneumatic Calibration
Model: M600KT Combo Pneumatic Calibration Pump Kit
Wide Pressure Range and Compatibility
- Vacuum 28″ Hg to pressure 600psi (combination pump)
- Compatible with all gauges and calibrators
- Connections (2 ports) 1/4 inch and 1/8 inch NPT/BSP
Please refer to product’s datasheet (PDF)
MH-10KT Hydraulic Pressure Kit / Pump
Model: MH10-KT Hydraulic Calibration Pump Kit, 0 to 10,000 PSIG Range
Wide Pressure Range
- 0 – 10,000 psi (700 Bar)
- Compatible with most hydraulic fluids, oils and water
- Connections (2 ports) 1/4 inch NPT/BSP
Please refer to product’s datasheet here. (PDF)
Isotech Multifunction Temperature Calibrator Europa-Venus-Calisto 4000 Series
Model: Europa-Venus-Calisto 4000 Series-45°C to 250°C. 35 x 160mm Volume
- Multi Function: Six Modes including Dry Block and Liquid Bath
- Fast Response 35mm x 160mm Calibration Volume
- Calibrate Whole Measurement Loop
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 384 x 212 x 312
FAST-CAL, Isotech Temperature Calibrator
Model: FAST-CAL (complete set) Isotech Temperature Calibrator
- Rugged, hard-wearing stainless steel case
- Lightweight, between 6.35 and 6.60 kg depending upon the model
- Easy to use on site
- Fast response, high stability
- Multiple sensor testing
Temp. Range
– 35 to 650 deg Celsius
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 248 x 228 x 143
Hotwire Anemometer
Model: AI 961Measures air velocity in m/sec, ft/min, km/sec, knots or mph
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 185 x 66 x 33
Package Dimensions (mm): 0 x 0 x 0