Taishio Din Rail Transmitter – Thermocouple, TS 213TC
• K,J,N,E,T,R,S Thermocouples Plus mV
• Simple push button configuration
• Advanced user config for access to 7 preset temperature ranges
• User push button trim
• Programmable burn out
• Galvanic isolation
OUTPUT
• Output Type 2 wire (4 to 20) mA current loop
• Output Range 4.0 mA to 20.0 mA
• Output connection Screw Terminal
• Maximum output 21.5 mA(in high burnout condition)
• Minimum output 3.8 mA(in low burnout condition)
• Accuracy (mA output / 2000) or 5 uA(Which ever is the greater)
• Max output load [(Vsupply -10) / 20) K Ohms (Example 700 ohms @ 24V)
TaishioTS 323 – High Accuracy Temperature Head Transmitter
FEATURES
• Programmable temperature head transmitter
• Galvanic Isolated
• Input: RTD (PT100, PT500, PT1000
• Thermocouples B, E, J, K, N, R, S,T
• Factory Preset (PT100, 3-wire, 0 to 100°C)
• Output Signal: 4 to 20mA, 2-wire
Please download the datasheet here. (pdf)
TH110 – Kimo Humidity and Temperature Sensor
Kimo’s TH 110 measured humidity and temperature from 5 to 95% RH and from 0 to 50°C.
- Measuring range from 5 to 95% RH and from 0 to 50°C (ambient model) or from -20 to +80°C (duct or remote model)
- 0-10 V output or 4-20 mA output
- With or without 10-digits LCD display
- Housing with simplified mounting system
- Software or DIP switch configuration
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here.
TH210 – Kimo Humidity and Temperature Sensor
Kimo’s TH 210-R measures humidity and temperature including 0 to 100 % RH and -20 to +80°C (ambient model), -20 to +80°C (pc remote probe), and -40 to +180°C (stainless steel remote probe).
- Stainless steel or polycarbonate probe
- With or without 2-line 19-digits LCD display
- 0-5/10 V or 0/4-20 mA outputs
- Trend indicator
- Two relays
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here. (pdf)
TS 203P – Taishio PT100 Temperature Transmitter
The transmitter is allow cost “smart” in head transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial (4-20)mA transmission signal.
SPECIFICATIONS @ 20ºC
- Input PT100 100R @ 2 or 3 Wire
- Range : (-200 to +850) ºC (18 to 390)Ω
- Min. span : 25ºC
- Linearisation : BS EN 60751(IEC 751) standard /
- Measurement Accuracy : 0.2ºC ± 0.05% of Reading
- Excitation current : <200 μA
- Max lead Resistance : 20 Ohms per leg
- Output : 2 wire (4 to 20) mA current loop
- Range : (4.0 to 20.0) mA
- Max output : 2 wire (4 to 20) mA current loop
Please download the datasheet here. (pdf)
TS 203TC – Taishio Thermocouple Transmitter
Input
- K (-200 to 1370°C)
- J (-100 to 1200°C)
- E ( -200 to 1000°C)
- N (-180 to 1300°C)
- T (-200 to 400°C)
- R (-10 to 1760°C)
- S (-10 to 1760°C)
- Accuracy : ±0.1%fs ±0.5°C
- Input mV ( -10 to 70mV)
- Accuracy ±0.2%fs
- Isolation Tested to 250vdc
- Sensor Burnout Either up or down scale output
- Cold Junction Range (-40 to 85°C) ;Accuracy ±0.5°C
- Stability Span 0.05°C/°C
- Output Range : 2 Wires (4 -20mA) current loop
- Output Connection Screw Terminal
Please download the datasheet here. (pdf)
TS 325 – Taishio High Accuracy Temperature Head Transmitter HART®
FEATURES
• Universal Input (RTD/TC/mV/Ω)
• Universal setting with HART®-protocol
• High accuracy in total ambient temperature range: 0.02% of span for Pt100 sensor , 0.1% of span for TC sensor
• Programmable via PC-Software
• 2-wire technology, 4 to 20mA analogue output
• Galvanic isolation (2000V AC)
• Internal temperature sensor for active temperature compensation (for TC sensor)
• Fault signal on sensor break or short circuit, presetable to NAMUR NE 43
Please download the datasheet here. (pdf)
TS13 – Taishio Wall Type Temperature & Humidity Transmitter
Model: TS13
Features
- High-Tech sensor component with high accuracy and long-term stability
- Economical choice, high C/P ratio
- Compact design, good look and easy to install
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 130.5 x 80 x 37
TS13 / TS14 – Taishio Temperature & Humidity Transmitter Indoor / Duct
SPECIFICATIONS
- Output:4 … 20 mA / 2-wire
- Input type : Capacitive humidity sensor & Pt1000 Ω
- Accuracy(at 25°C):±0.3°C+0.002°C x tactual;±3%RH(20 … 80%)
- Measuring range:0 … 50°C;0 … 100%RH
- IP rating: IP54 (Sensor: IP20)
Please download the datasheet here. (pdf)
TS14 – Taishio Duct Type Temperature & Humidity Transmitter
Model : TS14
Features
- High-Tech sensor component with high accuracy and long-term stability
- Economical choice, high C/P ratio
- Compact design, good look and easy to install
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 279 x 80 x 37