Kanomax Model 6900, Duct Air Leakage Tester
Kanomax has developed the most advanced Duct Air Leakage Tester (DALT) for commercial duct systems. It’s designed to be simple to use, accurate, and extremely convenient. The instrument provides step-by-step duct leakage test configuration and automated leakage testing based on the SMACNA HVAC Air Duct Leakage Test Manual, and is accurate to ±2.5% of reading. Though built tough with an on-board, powerful motor, the DALT 6900 is very easy to transport on its pneumatic tires and leaves little to no footprint on the job site.
The instrument requires very little training due to the easy-to-follow, full color HD touch screen display through which the user can follow the step-by-step ductwork leakage testing process and select from multiple choice configuration options. The touch screen also allows the user to quickly toggle between measurement unit outputs like Fahrenheit and Celsius temperature units to m3/s, CFM, l/s, or m3/h airflow units.
- Easy transport to the job with a small footprint and pneumatic tires allow for smooth movement
- Step-by-step test configuration and automated leakage testing based on the SMACNA Test Manual Capable of both positive and negative duct leakage testings
- Meets and/or exceeds the following standards for testing:
- SMACNA HVAC
- BS EN 12237:2003 EU
- BS EN 1507:2006 EU
- DW/143 EU
- Eurovent 2/2 EU
- GB50243 GB
- Our Duct Air Leakage Tester (DALT 6900), delivers the most accurate test results in either POSITIVE or NEGATIVE setting while delivering ±10 inches of water gauge pressure in the duct.
- Accurate to ±2.5% of READING of volume flow
- Stores data that can be downloaded easily to a USB flash drive for report generation from the commissioning engineer to the building owner or signing authority
- Engineered with the end-user’s perspective ensuring that it does what you need it to do and comes standard with a calibration* certificate.
- The instrument is designed for easy transport to the job with a small footprint and fits thru roof hatches 21″x 20″
- Order it with the optional Heavy Duty Construction Cover
Please refer to the product’s datasheet here. (pdf)
LV 130, KIMO Thermo-anemometer with Integrated Vane Probe
The Kimo LV 130 precisely measures air velocity and ambient temperature with a rotating vane probe.
FEATURES
- Precisely measures air velocity and ambient temperature with a rotating vane probe
- Selection of units (air velocity, airflow and temperature)
- Display max / min values with hold function
- Detection of flow direction
- Airflow calculation and automatic average
MEASURING RANGES
-
Velocity : 0.30 m/s … 35.00 m/s
-
Airflow : 0.00 m³/h … 99999.00 m³/h
-
Temperature : 0.00 °C … 50.00 °C
Please refer the product’s datasheet (pdf).
LV110, KIMO Thermo Anemometer with Vane Probe
FEATURES
- The anemometer display velocity and temperature measurements
- Selection of units (air velocity, airflow and temperature)
- Display max / min values and hold function is available
- Dimensions of rectangular and circular duct
- Detection of flow direction
Available model based on measuring ranges as below:
-
LV 110 : 0.30 m/s … 35.00 m/s
-
LV 111 : 0.80 m/s … 25.00 m/s
-
LV 117 : 0.40 m/s … 35.00 m/s
-
LV 110- LV111-LV 117 : 0.00 m³/h … 99999.00 m³/h
-
LV 110- LV111-LV 117 : -20.00 °C … 80.00 °C
Please refer to the product’s datahseet (pdf).
MODEL 2212, Handheld Indoor Air Quality Monitor
The Kanomax Indoor Air Quality Monitor – Model 2212 simplifies the labor involved and eliminates the need to purchase and learn multiple instruments. It simultaneously measures multiple parameters such as: CO, CO2, Temperature, and Relative Humidity. It is capable of calculating Dew Point, Web Bulb Temperature, Absolute Humidity, Humidity Ratio and % Outside Air. Calibration is easy and can be done by the user.
The monitor can also check CO2 levels and determine the rate of exchange, or the % of outside air, being introduced to a building per ASHRAE standard 62. It is capable of examining a building’s IAQ conditions to optimize worker productivity and features quick start-up and high accuracy in measuring CO2 and CO concentration levels in the environment.
- Simultaneously measures multiple parameters such as: CO, CO2, Temperature, RH, to monitor IAQ
- Calculates Dew Point, Web Bulb Temperature, Absolute Humidity, Humidity Ratio and % Outside Air
- Simplifies the labor involved and eliminates the need to purchase and learn multiple instruments
- Easy user self-calibration
- The monitor can also check CO2 levels and determine the rate of exchange, or the % of outside air, being introduced to a building per ASHRAE standard 62
- Examines building IAQ conditions to optimize worker productivity
- NIST Traceable Calibration Certificate*
- Features quick start-up and high accuracy in measuring CO2 and CO concentration levels in the environment
- Sampling function records multiple point measurements
Please refer to the product’s datasheet here. (pdf)
MP120, Kimo Manometer
A Micromanometer allows you to easily make HVAC pressure measurements.
The Kimo MP 120 is a portable, handheld meter suitable for measuring pressure and air velocity.
- Measuring range: pressure: -1,000 to +1,000 Pa and air velocity: 0 to 40 m/s
- Measurement unit Pa, m/s, km/h, fpm, inWg, mmH2O, daPa
- Adjustable backlight
- Manual autozero
- Easy to use
- Hold function and min-max values
- Calibration certificate
Please refer to the product’s datasheet here. (pdf)
RFTM-LQ-CO2, ROOM HUMIDITY, TEMPERATURE AND CO2 SENSOR AERASGARD®
The maintenance-free, microprocessor-controlled AERASGARD® RFTM – LQ – CO2 – Modbus and RCO2 – Modbus/ RLQ – CO2 – Modbus with Modbus connection, with/ without optional display, in an elegant housing, plastic, with snap-on lid, base with 4-hole attachment, is used to to monitor the entire room climate. For this purpose, measurands air humidity, temperature, CO2 concentration as well as air quality (VOC) are measured. By using a single device to monitor all four measurands, it is possible to effectively monitor and regulate the entire room climate.
A digital, long-term stable sensor used as measuring element for relative air humidity and temperature guarantees exact measurement results. The air quality is determined based on a (VOC) gas mixture sensor. The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red technology).
TS13 / TS14 – Taishio Temperature & Humidity Transmitter Indoor / Duct
SPECIFICATIONS
- Output：4 … 20 mA / 2-wire
- Input type : Capacitive humidity sensor & Pt1000 Ω
- Accuracy(at 25°C)：±0.3°C+0.002°C x tactual；±3%RH(20 … 80%)
- Measuring range：0 … 50°C；0 … 100%RH
- IP rating: IP54 (Sensor: IP20）
Please download the datasheet here. (pdf)
TS307 – Taishio Outdoor Temperature and Humidity Transmitter with Shield
FEATURES
• High accuracy and long term stability
• capable of temperature compensation and linear adjustment
SPECIFICATIONS
• Temp range : 0 to 80°C
• Output 4 to 20mA
• Humidity range : 0 to 100% RH
• Dew point : -40 to 60°C
• Signal connection : 3 wires
Please download the datasheet here. (pdf)
TS81/TS81A, Indoor Humidity and Temperature Transmitter
Features
- Excellent quality and stable measurement
- 1-point user adjustment
- Analogue output and RS485
- MODBUS RTU protocol with integer and floating type
- Unit support metric or imperial
- Configure adapter support
- Transistor output with PNP or NPN connection
- LCD display plus 3 capacitive buttons
Please refer to the product’s datasheet here. (pdf)
TSF14, Thermo Air Velocity Transmitter
Features
- Temperature compensation, linear adjustment function
- Switching analogue output by dip switch
- Off set function by button
Application
- Monitoring air and flow for industrial process
- HVAC, building, factory
Please refer to the product’s datasheet here. (pdf)
Vaisala Indigo Family
Discover the modular Indigo
The Vaisala Indigo family is a customizable instrument platform designed to improve process measurements. The Indigo family’s key feature is modularity. It contains a selection of transmitters, interchangeable smart probes that measure various parameters, and software for easy interfacing and monitoring of data. Choose any probe and connect it with any of the transmitters, or integrate the probes into other systems. The Indigo platform is built on top of Vaisala’s self-produced, core sensor technologies.
Whether you measure humidity, temperature, dew point, moisture in oil, carbon dioxide, barometric pressure, or vaporized hydrogen peroxide, the accuracy and long-term stability of Indigo-compatible probes are in the class of their own. The probes deliver repeatable measurement with high resolution, providing you with data that you can rely on, which helps you to make better decisions – over the long term.
Indigo transmitters
Vaisala Indigo transmitters offer many features that complement Indigocompatible smart probes. They enable real-time data visualization and access to probe configurations. They also offer additional connectivity, supply voltage, and wiring options compared to using a stand-alone smart probe.
- Indigo500 series – a robust transmitter with features including dual probe support, power over Ethernet, a robust metal enclosure, and touchscreen display.
- Indigo200 series – a transmitter with single probe support, analog, digital, and relay outputs, a modern graphical or numeric display, and wireless access via a nearby smartphone or PC.
Available Probe
- Humidity and temperature probes
- HMP1 for ambient measurement in indoor spaces and wall-mounting
- HMP3 for general-purpose use and duct mounting
- HMP4 for high-pressure or vacuum environments
- HMP5 for high temperature environments
- HMP7 for high-temperature and/or condensing environments
- HMP8 for high-pressure or leak-tight installation
- HMP9 for rapidly changing environments
- TMP1 for demanding temperature measurement
- Dew Point Probes
- DMP5 for high temperatures <180 °C (356 °F)
- DMP6 for very high temperatures <350 °C (660 °F)
- DMP7 for leak-tight installation <10 bar
- DMP8 for high-pressure or leak-tight installation <40 bar
- Moisture in Oil Probes
- Indigo compatible probe MMP8 incorporates the Vaisala HUMICAP 180L2 sensor, which is optimized for moisture in oil applications. The probe is suitable for demanding moisture measurement in a range of oils such as transformer, hydraulic, and lubrication oils and includes a CIGRE recommended traceable calibration certificate.
- Carbon dioxide (CO2) probes
- GMP251 for %-level measurements (0–20 %CO2)
- GMP252 for ppm-level measurements (0–10,000 ppmCO2)
- Vaporized hydrogen peroxide (H2O2) probes
- HPP271 for measuring H2O2 vapor concentration
- HPP272 for measuring H2O2 vapor concentration, relative saturation, humidity, and temperature
- Barometric pressure measurement
- The Indigo520 transmitter with the barometric pressure measurement module combined with one or two of the Indigo compatible humidity
and temperature measurement probes is a unique combination of a meteorological-grade barometer in a single industrial device. Measure
three parameters simultaneously: barometric pressure, humidity and temperature.
- The Indigo520 transmitter with the barometric pressure measurement module combined with one or two of the Indigo compatible humidity
Please download the datasheet here (pdf).
VT 110 / VT 115, KIMO Hotwire thermo-anemometer
Kimo’s VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe.
FEATURES
- Perfect for measuring airflow, air velocity and temperature with its hot wire probe
- Display max / min values
- Airflow calculation with cone
- Dimensions of rectangular and cicular duct
- Air velocity compensation in atmospheric pressure
MEASURING RANGES
-
Velocity : 0.15 m/s … 30.00 m/s
-
Airflow : 0.00 m³/h … 99999.00 m³/h
-
Temperature : -20.00 °C … 80.00 °C
Please refer to the product’s datasheet (pdf).