Taishio Din Rail Transmitter – Thermocouple, TS 213TC
• K,J,N,E,T,R,S Thermocouples Plus mV
• Simple push button configuration
• Advanced user config for access to 7 preset temperature ranges
• User push button trim
• Programmable burn out
• Galvanic isolation
OUTPUT
• Output Type 2 wire (4 to 20) mA current loop
• Output Range 4.0 mA to 20.0 mA
• Output connection Screw Terminal
• Maximum output 21.5 mA(in high burnout condition)
• Minimum output 3.8 mA(in low burnout condition)
• Accuracy (mA output / 2000) or 5 uA(Which ever is the greater)
• Max output load [(Vsupply -10) / 20) K Ohms (Example 700 ohms @ 24V)
TaishioTS 323 – High Accuracy Temperature Head Transmitter
FEATURES
• Programmable temperature head transmitter
• Galvanic Isolated
• Input: RTD (PT100, PT500, PT1000
• Thermocouples B, E, J, K, N, R, S,T
• Factory Preset (PT100, 3-wire, 0 to 100°C)
• Output Signal: 4 to 20mA, 2-wire
Please download the datasheet here. (pdf)
Sale
TH110 – Kimo Humidity and Temperature Sensor
Kimo’s TH 110 measured humidity and temperature from 5 to 95% RH and from 0 to 50°C.
- Measuring range from 5 to 95% RH and from 0 to 50°C (ambient model) or from -20 to +80°C (duct or remote model)
- 0-10 V output or 4-20 mA output
- With or without 10-digits LCD display
- Housing with simplified mounting system
- Software or DIP switch configuration
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here.
TH210 – Kimo Humidity and Temperature Sensor
Kimo’s TH 210-R measures humidity and temperature including 0 to 100 % RH and -20 to +80°C (ambient model), -20 to +80°C (pc remote probe), and -40 to +180°C (stainless steel remote probe).
- Stainless steel or polycarbonate probe
- With or without 2-line 19-digits LCD display
- 0-5/10 V or 0/4-20 mA outputs
- Trend indicator
- Two relays
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here. (pdf)
TS 203P – Taishio PT100 Temperature Transmitter
The transmitter is allow cost “smart” in head transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial (4-20)mA transmission signal.
SPECIFICATIONS @ 20ºC
- Input PT100 100R @ 2 or 3 Wire
- Range : (-200 to +850) ºC (18 to 390)Ω
- Min. span : 25ºC
- Linearisation : BS EN 60751(IEC 751) standard /
- Measurement Accuracy : 0.2ºC ± 0.05% of Reading
- Excitation current : <200 μA
- Max lead Resistance : 20 Ohms per leg
- Output : 2 wire (4 to 20) mA current loop
- Range : (4.0 to 20.0) mA
- Max output : 2 wire (4 to 20) mA current loop
Please download the datasheet here. (pdf)
TS 203TC – Taishio Thermocouple Transmitter
Input
- K (-200 to 1370°C)
- J (-100 to 1200°C)
- E ( -200 to 1000°C)
- N (-180 to 1300°C)
- T (-200 to 400°C)
- R (-10 to 1760°C)
- S (-10 to 1760°C)
- Accuracy : ±0.1%fs ±0.5°C
- Input mV ( -10 to 70mV)
- Accuracy ±0.2%fs
- Isolation Tested to 250vdc
- Sensor Burnout Either up or down scale output
- Cold Junction Range (-40 to 85°C) ;Accuracy ±0.5°C
- Stability Span 0.05°C/°C
- Output Range : 2 Wires (4 -20mA) current loop
- Output Connection Screw Terminal
Please download the datasheet here. (pdf)
TS 325 – Taishio High Accuracy Temperature Head Transmitter HART®
FEATURES
• Universal Input (RTD/TC/mV/Ω)
• Universal setting with HART®-protocol
• High accuracy in total ambient temperature range: 0.02% of span for Pt100 sensor , 0.1% of span for TC sensor
• Programmable via PC-Software
• 2-wire technology, 4 to 20mA analogue output
• Galvanic isolation (2000V AC)
• Internal temperature sensor for active temperature compensation (for TC sensor)
• Fault signal on sensor break or short circuit, presetable to NAMUR NE 43
Please download the datasheet here. (pdf)
Sale
TS13 – Taishio Wall Type Temperature & Humidity Transmitter
10$
Model: TS13
Features
- High-Tech sensor component with high accuracy and long-term stability
- Economical choice, high C/P ratio
- Compact design, good look and easy to install
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 130.5 x 80 x 37
TS13 / TS14 – Taishio Temperature & Humidity Transmitter Indoor / Duct
SPECIFICATIONS
- Output：4 … 20 mA / 2-wire
- Input type : Capacitive humidity sensor & Pt1000 Ω
- Accuracy(at 25°C)：±0.3°C+0.002°C x tactual；±3%RH(20 … 80%)
- Measuring range：0 … 50°C；0 … 100%RH
- IP rating: IP54 (Sensor: IP20）
Please download the datasheet here. (pdf)
Sale
TS14 – Taishio Duct Type Temperature & Humidity Transmitter
10$
Model : TS14
Features
- High-Tech sensor component with high accuracy and long-term stability
- Economical choice, high C/P ratio
- Compact design, good look and easy to install
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 279 x 80 x 37
TS307 – Taishio Outdoor Temperature and Humidity Transmitter with Shield
FEATURES
• High accuracy and long term stability
• capable of temperature compensation and linear adjustment
SPECIFICATIONS
• Temp range : 0 to 80°C
• Output 4 to 20mA
• Humidity range : 0 to 100% RH
• Dew point : -40 to 60°C
• Signal connection : 3 wires
Please download the datasheet here. (pdf)
TS81/TS81A, Indoor Humidity and Temperature Transmitter
Features
- Excellent quality and stable measurement
- 1-point user adjustment
- Analogue output and RS485
- MODBUS RTU protocol with integer and floating type
- Unit support metric or imperial
- Configure adapter support
- Transistor output with PNP or NPN connection
- LCD display plus 3 capacitive buttons
Please refer to the product’s datasheet here. (pdf)
Sale
Vaisala Dew Point and Pressure Transmitter for Compressed Air Measurement – DPT146
10$
DPT146 for compressed air measurement makes monitoring compressed air simple and convenient. The DPT146 measures both dew point and process pressure simultaneously, and is the ideal choice for anyone using or monitoring compressed air.
FEATURES
• A simple and convenient transmitter for monitoring of compressed air
• Highly accurate RH info as the dew point data coupled with live pressure input
• Compatible with the Vaisala Hand-Held DM70 for easy spot-checking
• Pressure: 1 … 12 bar
• Dew point: -70 … +30 °C (-94 … +86 °F)
• Digital output RS-485 with MODBUS
Sale
Vaisala Dew Point Meter for Refrigerant Dryers, DMT132
10$
Vaisala HUMICAP® Dewpoint Transmitter DMT132 is an affordable dew point measurement instrument designed to verify the functionality of refrigerant dryers. The probe has excellent long-term stability and it is resistant to compressor oil. It is especially well suited for OEM dryer manufacturers.
The Vaisala HUMICAP® Dewpoint Transmitter DMT132 is designed to verify the functionality of refrigerant dryers. Knowledge of the real dew point, not just refrigerator temperature, ensures high quality compressed air at all times and enables optimization of dryer capacity. It is especially well suited for OEM dryer manufacturers.
FEATURES
• High accuracy ±1°C (±1.8°F) in the measurement range of refrigerant dryers
• Low power requirements, 10 …. 28 VDC
• Optional LED warning light
• Optional loop powered display, Nokeval 301