Pressure sensor 522 for shipbuilding
The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.
The pressure measuring cell incorporates a fully welded construction within the transducer housing. Highest requirements in various applications concerning burst can be met.
All pressure transmitters of type 522 have the most important certifications for the shipbuilding industry.
FEATURES
- Compact, rugged construction
- Welded without sealing parts
- Certified for shipbuilding with : Germanischer Lloyd; American Bureau of Shipping; Bureau Veritas; Det Norske Veritas; Lloyd’s Register
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : 0 … 2.5 – 600 bar
- Output : 0 … 10V, 4 … 20mA
- Accuracy : typ. < 0.3% FS
- Electrical connection : Connector DIN 175301-803-A, M12 x 1, swift connector
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
DOS 001 – Stiko Deadweight Testers
High accuracy deadweight tester with an accuracy of 0.01% of reading.
- Two 4-wire analogue output 0-5/10 V or 0/4-20 mA
- ABS housing IP 65, with or without 2-lines 19-digits LCD display, 2 relays, software or keyboard
configuration - Quick and easy mounting with the 1/4 turn system with wall-mount plate
- Configurable air velocity range from 0 to 30 m/s with hotwire probe
Please refer to product’s datasheet (PDF)
TS40P, Taishio Pneumatic Pressure Handpump
- Pressure to 40 Bar, vacuum better than 0.95 bar
- Through hand operated scissors action pump
- With 1m flexible hose with 1/4″ BSP (F) swivel adaptor for connecting the test instrument
- Combination of vacuum and pressure
Please refer to product’s datasheet (PDF)
MGF16BN – Meriam Digital Pressure Gauge (Medical)
The MGF16BN digital pressure gauge is designed to handle the demands of pressure measurement. Pressure ranges are available to 5 000 PSIG at standard accuracy of ± 0.25 % of full scale or higher accuracy of ± 0.1 % of full scale.
The display is a 4 digit LCD with 0.5″ high numerals and a lower alphanumeric display for engineering units to aid in set up. Each gauge includes up to 15 selectable engineering units depending on the sensor range. The gauge is powered by two AA alkaline batteries.
- ±0.25% Test Gauge Accuracy
- 316L Stainless Steel Wetted Parts
- NEMA 4X
- Capture Minimum and Maximum Readings
- Push Button Zero
- Selectable Engineering Units
- Selectable Auto Shutoff Times
Please refer to product’s datasheet (PDF)
TS-DPG-110, Taishio High Accuracy Digital Pressure Gauge
High-precision pressure sensor 0.2% FS accuracy
- 4-digit LCD showing the pressure reading accurately in real time
- Different pressure units to choose from, zero clearing, backlight on/off
- Display units: kPa, PSI, kg/cm2, Bar, MPa
- Battery-powered, low-power design
- High-precision pressure sensor 0.2%FS
- Overload Capacity 150%
- Operating Temperature 0 to 40°C
Please refer to product’s datasheet (PDF)
C310 – Kimo Multifunction Sensor
Kimo’s C 310 is a multifunction sensor with interchangeable probes. It can display and measure four parameters simultaneously.
FEATURES
- Two inputs for probes
- Four visual and audible alarms
- Two analogue outputs 0-5/10 V or 0/4-20 mA
- Four RCR relays (option)
- Ethernet communication (option) and RS485 MODBUS (option)
- Adjustment certificate
Please download the datasheet here.
Sale
Pressure sensor 528
10$
The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These pressure transmitters are suitable for applications across a broad spectrum of industries.
FEATURES
- Compactt, rugged construction
- Negligible temperature influence on accuracy
- Large selection of connections available
- Saving time by quick cable mounting by the customer with swift connector
SPECIFICATIONS
- Medium : Liquids and gases
- Pressure range : -1 … 0-60 bar
- Output :0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA, ratiom. 10 … 90%
- Accuracy: typ. <0.3% fs
- Electric connection : Swift connector, metri pack, M12 x 1, connector DIN 175301-803-A or C, braids, connector RAST 2.5
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
Sale
Mechanical Pressure Switch 625
10$
Type 625 pressure switches, with 13 pressure ranges, are suitable for liquids and gases. Body materials are available in plastic, brass and aluminium, with a choice of NBR, FPM, EPDM and silicone diaphragms. Very high precision through finely tuned measurement stages and high longterm stability. Rugged design and especially suitable for use in general industrial equipment construction, process technology and food automation.
FEATURES
- High accuracy by 13 ideally designed pressure range increments
- Switching differences adjustable
- High long term stability with repro ducibility of switching points < ±0.3 mbar
- Customer specific switching points adjustable in factory
- Compact, rugged construction
- Ideal price / performance ratio
SPECIFICATIONS
- Medium : Liquids and neutral gases
- Pressure range : -900 … 6000 mbar
- Electrical connection : Screw terminals, flat connector 6.3 mm
- Pressure connection : Inside thread M5, hose connector ± 6 mm, outside thread
- Mounting bracket
Please refer the datasheet here. (pdf)