Sale
Kestrel 5200 Professional Environmental Meter
10$
Model: Kestrel 5200
Whether you’re pouring concrete, balancing HVAC systems, or monitoring jobsite conditions, the Kestrel 5200 Professional Environmental Meter takes the calculations and guesswork out of your job with integrated specialty calculations. No more guessing or using inaccurate data from miles away.
The 5200’s NEW Concrete Target Evaporation Rate Solver allows user to adjust calculator for varying weather conditions and displays the risk of plastic shrinkage cracking for each scenario — enabling contractors to determine the appropriate set of precautionary steps that will result in a successful pour. The Kestrel 5200 offers advanced calculators and readings that are unique in the portable meter market and are designed to make your job easier. In addition to measuring current environmental conditions, the 5200’s new Concrete Target Evaporation Rate Solver displays the level of cracking risk based on user-defined weather conditions and shows which environmental factors may require adjustments in order to prevent plastic shrinkage cracking. With reliable real-time environmental monitoring of jobsite conditions along with accurate predictive calculations, the Kestrel 5200 Professional Environmental Meter with LiNK® Bluetooth Low Energy Technology helps concrete contractors know when to take steps to minimize the risk by adjusting the mix or utilizing protective measures.
Environmental Measurements
- Air Density
- Air Flow (CFM)
- Altitude (Barometric)
- Barometric Pressure
- Delta T
- Density Altitude
- Dew Point Temperature
- Evaporation Rate
- Heat Stress Index
- Humidity Ratio
- Relative Air Density
- Relative Humidity
- Station Pressure (Absolute Pressure)
- Temperature
- Wet Bulb Temperature (Psychrometric)
- Wind Chill
- Wind Speed/Air Speed
Please download datasheet (pdf) here.
Kestrel 5500 Weather Meter
Model: Kestrel 5500
This Kestrel meter does it all! The Kestrel 5500 Weather Meter provides the same trusted accuracy, reliability, and usability as the original Kestrel 4500. Measure every environmental condition plus wind direction, crosswind and headwind/tailwind. Use it golfing, sailing, flying, spraying, shooting and more. Drop-proof, dust-proof, waterproof and able to withstand extreme environments without damage, your Kestrel weather meter travels with you anywhere you dare to go. A range of carry pouch options makes it even easier to take your Kestrel meter with you.
Kestrel 5500 is available in:
- Non Bluetooth
- W/ Bluetooth LiNK & Vane Mount
- Tripod (sold separately)
- Colors: Yellow, Olive Drab, Desert Tan
Features
- Dongle
- Bluetooth LINK to Smartphones / Mobile / Android / IOS
- Takes 1 AA battery (instead of 2 AAA)
- Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series<
- Improved high resolution screen for any lighting (even sunlight) and easy on your eyes.
- Intuitive user-interface screen navigation
- Multiple Languages: English, French, German, Spanish
- Scratch and breakage-resistant window
- All meters include both options of Red (NV – Night Vision) & White backlights.
- Slightly bigger, not really noticeable difference. Fits same cases.
- Includes vane mount with 5500 LiNK option
- Roughly 12,000 data points.
- Digital Compass
- Wind Direction
- Crosswind
- Headwind / Tailwind
Environmental Measurements
- Altitude (Barometric)
- Barometric Pressure
- Compass Direction
- Crosswind
- Density Altitude
- Dew Point Temperature
- Headwind/Tailwind
- Heat Stress Index
- Relative Humidity
- Station Pressure (Absolute Pressure)
- Temperature
- Wet Bulb Temperature (Psychrometric)
- Wind Chill
- Wind Speed/Air Speed
Please download the datasheet (pdf) here.
Sale
Kestrel Meter Impeller
10$
Replacement impeller for all Kestrel Meters. User replaceable.
Impeller Replacement Instructions
Using your thumbs, press FIRMLY on the impeller module to remove the entire unit.
Press only the sides of the new impeller when installing to avoid damaging the precision hub bearing.
Insert the impeller so that the half that has the serial number label on it goes in first and faces the back of the unit once in place. Orient one “arm’ straight up (The impeller should look like a peace symbol or an upside-down Y).
My impeller is making a rattling/clicking/whirring noise, is that normal?
It is common for the Kestrel to make a rattling noise with a wind speed from 5 to 10 miles per hour. This is completely normal and accurate.
To better understand why the impeller rattles, one needs to know what is inside. Inside the plastic housing, there are four separate parts. The fan, two sapphire jewel bearings and a metal pin. The fan rotates around the metal pin which is held in the plastic housing by the jewel bearings. For the fan to move freely (to not cause excess friction) there is a small space (on either side) between the end of the metal pin and the jewel bearing. The space between the metal pin and the jewel bearing is what causes the rattle. Some impellers can be louder than others, but the accuracy will be the same.
Kestrel Portable Vane Mount
The Kestrel Portable Vane Mount is a simple yet ingenious accessory for your Kestrel 4000 series weather tracker that assembles in seconds and enables your meter to freely adjust to the wind direction.
The Vane Mount attaches easily to the Kestrel Portable Tripod (or any tripod) to add directional measurement capabilities to your Kestrel Meter.
Kit includes:
- Custom molded cup bracket with incorporated level for maximum compass accuracy
- Precision pivot with standard 1/4 – 20 tripod mount
- Lightweight thin-wall anodized aluminum shaft and molded vane
- Padded nylon zipper carry pouch with belt loop that holds mount and Kestrel Meter
Kestrel Weather Meter Tripod
Compatible with the Portable Vane Mount and any Kestrel Meter.
Available Tripod:
Kestrel Meter Collapsible Tripod
- Stands 48.25 inches high when fully extended 51.4″)
- Measures 13.6 inches when collapsed
- Five section twist-and-pull legs
- Weighs under 2 lbs
- Compatible with the Kestrel Portable Vane Mount
- Place of Origin: China
- Included Clamp that mounts a Kestrel Meter
- Included Carry case for the Tripod
Kestrel Portable Mini Tripod
- Tripod Clamp is optional
- Maximum Safe Load: 6 lbs
- Measures 7.5″ to the base when standing on a flat surface
- Pan Adjustment: 360 degrees
- Tilt Adjustment: +/- 90 degrees
- Angular Adjustment: +/- 20 degrees
- Part #: With Clamp: 0799. Without Clamp: 0796
- Dimensions (folded): 7″ x 2″ x 2″, 17.8cm x 5.1cm x 5.1cm
- Weight: 4.2 oz., 119g
LV 130, KIMO Thermo-anemometer with Integrated Vane Probe
The Kimo LV 130 precisely measures air velocity and ambient temperature with a rotating vane probe.
FEATURES
- Precisely measures air velocity and ambient temperature with a rotating vane probe
- Selection of units (air velocity, airflow and temperature)
- Display max / min values with hold function
- Detection of flow direction
- Airflow calculation and automatic average
MEASURING RANGES
-
Velocity : 0.30 m/s … 35.00 m/s
-
Airflow : 0.00 m³/h … 99999.00 m³/h
-
Temperature : 0.00 °C … 50.00 °C
Please refer the product’s datasheet (pdf).
LV110, KIMO Thermo Anemometer with Vane Probe
FEATURES
- The anemometer display velocity and temperature measurements
- Selection of units (air velocity, airflow and temperature)
- Display max / min values and hold function is available
- Dimensions of rectangular and circular duct
- Detection of flow direction
Available model based on measuring ranges as below:
-
LV 110 : 0.30 m/s … 35.00 m/s
-
LV 111 : 0.80 m/s … 25.00 m/s
-
LV 117 : 0.40 m/s … 35.00 m/s
-
LV 110- LV111-LV 117 : 0.00 m³/h … 99999.00 m³/h
-
LV 110- LV111-LV 117 : -20.00 °C … 80.00 °C
Please refer to the product’s datahseet (pdf).
Model 6710, TABMASTER Airflow Capture Hood
Whether you need to test a newly installed HVAC system for initial functionality, re-test a building’s HVAC after it undergoes significant constructional changes, or regular seasonal change check-ups, the TABmaster Flow Hood Model 6710 needs to be in your equipment arsenal.
The unit has some defining characteristics that put it into the running for best choice among professionals who actually operate TAB instruments in the field on a day-to-day basis.
- 23 to 2500 CFM (40 to 4250 m3/h) range
- Simultaneously measures and displays air flow, temperature and humidity
- Displays the direction of the airflow as well as the velocity
- Store up to 3,000 measurements
- Advanced storage feature allows you to store multiple measurements under a single ID number
- This is the perfect tool for accurate supply and return airflow measurements
- Our optional interchangeable hoods make it a snap to sample the air for any duct size
- The unit is lightweight and easy to handle
- Simultaneously measures and displays air flow, temperature and humidity
- Motorized tilt on meter to allow for meter angle adjustment
- A multi-functional instrument that measures airflow and pressure readings
- Air volumetric flow measurements through registers, diffusers and grilles
- Displays Air velocity direction and measurement in full color for clear, easy viewing
- HERS (Home Energy Rating System) approved testing instrument
Please refer to the product’s datasheet here. (pdf)
TSF14, Thermo Air Velocity Transmitter
Features
- Temperature compensation, linear adjustment function
- Switching analogue output by dip switch
- Off set function by button
Application
- Monitoring air and flow for industrial process
- HVAC, building, factory
Please refer to the product’s datasheet here. (pdf)
VT 110 / VT 115, KIMO Hotwire thermo-anemometer
Kimo’s VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe.
FEATURES
- Perfect for measuring airflow, air velocity and temperature with its hot wire probe
- Display max / min values
- Airflow calculation with cone
- Dimensions of rectangular and cicular duct
- Air velocity compensation in atmospheric pressure
MEASURING RANGES
-
Velocity : 0.15 m/s … 30.00 m/s
-
Airflow : 0.00 m³/h … 99999.00 m³/h
-
Temperature : -20.00 °C … 80.00 °C
Please refer to the product’s datasheet (pdf).
VT 210, KIMO Thermo-hygrometer-anemometer
Multifunction device specially designed for the control of the ventilation systems, allowing to measure the air velocity, the airflow and the temperature in duct.
Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts.
FEATURES
- Up to 6 simultaneous measurements
- Besides speed measurement probes (vanes, hotwire or omnidirectionnal), a hygrometry probe or climatic condition and temperature module is also accepted
- Several packs available for different applications:
- With vane probe (100mm / 70mm / 14mm) telescopic tilting in 90 ° or standard
- With telescopic hotwire probe tilting in 90 ° or standard
- Optional: wired or radio temperature probe and humidity probe
- Memory capacity: Up to 1000 dataset of 20 000 points
- Interchangeable measurement modules
- 2 inputs fot Pt100 temperature (from -200 to +600°C)
- Device/probe wireless communication
MEASUREMENT RANGES
- Velocity : from -5 to 35 m/s
- Airflow : from 0 to 99 999 m3/h
- Integrated temperature of measurement probes : -20 to 80°C
Please refer to the product’s datasheet (pdf)