Air Flow

  • show by: 24

Kestrel Portable Vane Mount

The Kestrel Portable Vane Mount is a simple yet ingenious accessory for your Kestrel 4000 series weather tracker that assembles in seconds and enables your meter to freely adjust to the wind direction.

The Vane Mount attaches easily to the Kestrel Portable Tripod (or any tripod) to add directional measurement capabilities to your Kestrel Meter.

 

Kit includes:

  • Custom molded cup bracket with incorporated level for maximum compass accuracy
  • Precision pivot with standard 1/4 – 20 tripod mount
  • Lightweight thin-wall anodized aluminum shaft and molded vane
  • Padded nylon zipper carry pouch with belt loop that holds mount and Kestrel Meter

 

Kestrel Weather Meter Tripod

Compatible with the Portable Vane Mount and any Kestrel Meter.

Available Tripod:

Kestrel Meter Collapsible Tripod

  • Stands 48.25 inches high when fully extended 51.4″)
  • Measures 13.6 inches when collapsed
  • Five section twist-and-pull legs
  • Weighs under 2 lbs
  • Compatible with the Kestrel Portable Vane Mount
  • Place of Origin: China
  • Included Clamp that mounts a Kestrel Meter
  • Included Carry case for the Tripod

Kestrel Portable Mini Tripod

  • Tripod Clamp is optional
  • Maximum Safe Load: 6 lbs
  • Measures 7.5″ to the base when standing on a flat surface
  • Pan Adjustment: 360 degrees
  • Tilt Adjustment: +/- 90 degrees
  • Angular Adjustment: +/- 20 degrees
  • Part #: With Clamp: 0799. Without Clamp: 0796
  • Dimensions (folded): 7″ x 2″ x 2″, 17.8cm x 5.1cm x 5.1cm
  • Weight: 4.2 oz., 119g

Kestrel 5500 Weather Meter

Model: Kestrel 5500

This Kestrel meter does it all! The Kestrel 5500 Weather Meter provides the same trusted accuracy, reliability, and usability as the original Kestrel 4500. Measure every environmental condition plus wind direction, crosswind and headwind/tailwind. Use it golfing, sailing, flying, spraying, shooting and more. Drop-proof, dust-proof, waterproof and able to withstand extreme environments without damage, your Kestrel weather meter travels with you anywhere you dare to go. A range of carry pouch options makes it even easier to take your Kestrel meter with you.

 

Kestrel 5500 is available in:

  • Non Bluetooth
  • W/ Bluetooth LiNK & Vane Mount
  • Tripod (sold separately)
  • Colors: Yellow, Olive Drab, Desert Tan

Features

  • Dongle
  • Bluetooth LINK to Smartphones / Mobile / Android / IOS
  • Takes 1 AA battery (instead of 2 AAA)
  • Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series<
  • Improved high resolution screen for any lighting (even sunlight) and easy on your eyes.
  • Intuitive user-interface screen navigation
  • Multiple Languages: English, French, German, Spanish
  • Scratch and breakage-resistant window
  • All meters include both options of Red (NV – Night Vision) & White backlights.
  • Slightly bigger, not really noticeable difference.  Fits same cases.
  • Includes vane mount with 5500 LiNK option
  • Roughly 12,000 data points.
  • Digital Compass
  • Wind Direction
  • Crosswind
  • Headwind / Tailwind

Environmental Measurements

  • Altitude (Barometric)
  • Barometric Pressure
  • Compass Direction
  • Crosswind
  • Density Altitude
  • Dew Point Temperature
  • Headwind/Tailwind
  • Heat Stress Index
  • Relative Humidity
  • Station Pressure (Absolute Pressure)
  • Temperature
  • Wet Bulb Temperature (Psychrometric)
  • Wind Chill
  • Wind Speed/Air Speed

 

Please download the datasheet (pdf) here.

Kestrel 2000 Wind Meter

Model: Kestrel 2000

The Kestrel 2000 Hand Held Weather Meter is a perfect companion of any outdoor enthusiast that relies on knows either wind speed, temperature, or both! Capable of measuring the air temperature, the waterproof Kestrel 2000 can also measure the temperature of water or snow. Simply dip the meter in water or snow for 30 seconds to know just how cold it is before jumping in. A hard slide-on case, lanyard, and battery are included and the Kestrel 2000’s backlight allows you to check the measurements even in the darkness.

Features

  • Temperature Sensor (Patented External Isolated)
  • Waterproof to IP67 standards (can be submerged up to 3’/1M for up to 30 minutes)
  • Backlight
  • Data hold function
  • User replaceable impeller
  • Reliable, portable and easy to use
  • Assembled in the USA
  • 5 year warranty

Environmental Measurements

  • Current Wind Speed
  • Maximum Wind Gust
  • Average Wind Speed
  • Temperature (Air, Water, & Snow)
  • Wind Chill

 

Please download the datasheet (pdf) here.

Kanomax 6501 Series, CLIMOMASTER ANEMOMETER

The most accurate handheld hot-wire anemometer of its kind.

The Climomaster anemometer is a research grade handheld hot-wire anemometer that promises level 2% m.v. accuracy, making it the most accurate hot-wire airflow meter in the world. It offers a ton of flexibility and options including 8 different probes types. These probes are all interchangeable and can be used with a single main unit without any additional calibration.

Climomaster Hot-Wire Anemometer – 6501 Series probes can measure temperature and/or humidity along with air flow. Other probes are designed for use in turbulent or high-velocity airflow and some are miniaturized for use in really tight spaces like those encountered when checking the cooling profile of a circuit board. The unit comes standard with 20,000 record storage capacity and advanced data logging capability. It can also be ordered with a pressure sensor and analog output if desired. Many additional accessories such as software, extension rods, hands-free case and special cable lengths are also available.

 

Features & Benefits

  • Its sleek, ergonomic design with anti-slip grip comes standard with a highly visible backlit display making it the handheld choice of Journeymen technicians in the field.
  • Stores up to 20,000 data points which is easily downloaded to your company computer for analysis via the USB interface.
  • The optional software allows the users to view real-time data graphically formatted on their company computer
  • For your convenience the anemometer keeps track of its own calibration cycle and reminds you when it is due for calibration*.
  • The Climomaster 6501-CE measures pressure and features an analog output.
  • Equipped with an automatic atmospheric pressure compensation function.
  • When the direction of the airflow is known, choose a unidirectional probe.
  • When the direction of the airflow is unknown or turbulent, choose an omnidirectional probe.

 

Download datasheet here (pdf).

Kanomax Model 6900, Duct Air Leakage Tester

Kanomax has developed the most advanced Duct Air Leakage Tester (DALT) for commercial duct systems. It’s designed to be simple to use, accurate, and extremely convenient. The instrument provides step-by-step duct leakage test configuration and automated leakage testing based on the SMACNA HVAC Air Duct Leakage Test Manual, and is accurate to ±2.5% of reading. Though built tough with an on-board, powerful motor, the DALT 6900 is very easy to transport on its pneumatic tires and leaves little to no footprint on the job site.

 

The instrument requires very little training due to the easy-to-follow, full color HD touch screen display through which the user can follow the step-by-step ductwork leakage testing process and select from multiple choice configuration options. The touch screen also allows the user to quickly toggle between measurement unit outputs like Fahrenheit and Celsius temperature units to m3/s, CFM, l/s, or m3/h airflow units.

 

  • Easy transport to the job with a small footprint and pneumatic tires allow for smooth movement
  • Step-by-step test configuration and automated leakage testing based on the SMACNA Test Manual Capable of both positive and negative duct leakage testings
  • Meets and/or exceeds the following standards for testing:
    • SMACNA HVAC
    • BS EN 12237:2003 EU
    • BS EN 1507:2006 EU
    • DW/143 EU
    • Eurovent 2/2 EU
    • GB50243 GB
  • Our Duct Air Leakage Tester (DALT 6900), delivers the most accurate test results in either POSITIVE or NEGATIVE setting while delivering ±10 inches of water gauge pressure in the duct.
  • Accurate to ±2.5% of READING of volume flow
  • Stores data that can be downloaded easily to a USB flash drive for report generation from the commissioning engineer to the building owner or signing authority
  • Engineered with the end-user’s perspective ensuring that it does what you need it to do and comes standard with a calibration* certificate.
  • The instrument is designed for easy transport to the job with a small footprint and fits thru roof hatches 21″x 20″
  • Order it with the optional Heavy Duty Construction Cover

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 3905 / 3910, Portable Particle Counters

Kanomax Portable Particle Counters – Models 3905 and 3910 are the smallest 6-channel portable particle counters in the industry. They measure particles at 1.0 CFM (28.3 LPM) and 1.77 CFM (50 LPM), respectively. Both models feature 0.3-micron minimum sensitivity, large color touch screens with a streamlined and user-friendly interface programmed with different standards to help guide users through the measuring and certification process.

 

An optional Climomaster hot-wire environmental sensor is available. It provides the ability to measure air velocity, temperature and humidity, making the 3900 Series Portable Particle Counters the ultimate tools for cleanroom certification

Beyond their power and diversity as measuring tools, they are also extremely lightweight, small and incredibly easy to transport. They are fully compliant with ISA 21501-4 calibration standards and they enable you to certify cleanrooms up to ISO Class 2. Again, the multi-standard modes simplify cleanroom certifications based on ISO 14644, FS 209E, BS 5295 and EC GMP, which make the measuring process simple and offer you peace of mind when measuring for specific results.

 

There is a built-in printer and onboard data logging memory that stores up to 10,000 records at a time. The lightweight enclosure is stainless steel and absolutely cleanroom friendly, and the diverse offering of options (including the differential pressure sensor and optional second Li-Ion battery for extended operating time) truly make these portable particle counters the most powerful cleanroom measuring instruments on the market.

 

  • 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0µm, 10.0µm
  • 28.3 lpm (1.0 cfm) or 50 lpm (1.77 cfm) flow rate speeds the sampling process
  • Simultaneously measures and displays up to 6 particle sizes from 0.3 to 10 microns
  • Fully compliant with ISO 21501-4 calibration standard
  • Enables you to certify cleanrooms up to ISO Class 2
  • 50LPM and 1 CFM flow rate respectively and a 0.3micron sensitivity.
  • Upload from blueprint your cleanroom layout
  • Optional CLIMOMASTER environmental sensor provides the ability to measure air velocity, temperature and humidity making these instruments the ultimate tools for cleanroom certification.
  • Intuitive ICON-driven screens and menus are easy to learn and simple to use
  • NIST TRACEABLE CALIBRATION Certificate* comes standard
  • 3910/3905 can store up to 10,000 records of particle count data from up to 6 particle channels and the configurable recipe database can store up to 50 recipes for sampling and reports.
  • All data can be quickly and reliably transferred to a computer, a Facility Monitoring System or Building Automation System.
  • Secure data transfer to a USB Flash Drive
  • 21 CFR Part 11 compliant with IQ/OQ documentation available
  • Built-in printer and onboard datalogging (up to 10,000 records) is standard on both 3910 /3905
  • Flexible communication with these instruments is made possible by the integrated Ethernet, RS-485, USB and Flash Drive memory card interfaces

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 3888 / 3889, Handheld Particle Counters

Kanomax’s innovative Handheld Particle Counters (Models 3888 & 3889) set the standard of instrumentation in cleanroom / operating room monitoring and verification, filter testing, IAQ investigation, data center cleaning and many more highly specialized and highly sensitive applications. These beautifully engineered devices boast some of the most highly advanced technology in the industry. A combination of accuracy and practicality, these devices count airborne particles with high quality performance.

 

Since their inception, Kanomax particle counters have been the trusted choice in measuring instruments of by an ever-growing group of leaders in pharmaceutical, semiconductor, food and beverage industries. The 3888 and 3889 models perform with the same reliability and accuracy as their predecessors, but now have features that make them easier to use and that can gather measurements significantly faster. They have very large, full color 4.3 inch LCD touchscreens, which can actually display data graphically for speedy interpretation. Despite the fact that measurements can very easily be taken directly from the instrument, these new models also include the easiest options for transferring data to PCs and other devices. There is an onboard USB input, which will accept a USB drive and download any number of the possible 10,000 data logs and transferred into a Windows 10 application.

The Kanomax Handheld Particle Counters meet ISO 21501-4 Standard and are fully RoHS compliant.

 

  • Model 3888 displays 3 particle sizes simultaneously (0.3, 0.5, 5.0μm) in cf or m3
  • Model 3889 displays 6 particle sizes simultaneously (0.3, 0.5, 1.0, 3.0, 5.0, 10.0μm) in cf or m3
  • Large, 4.3-inch full-color touchscreen
  • 0.3 micron minimum sensitivity
  • Store up to 10,000 measurements
  • Compact and Light weight
  • Remote control software
  • Easy to read and interpret data due to large screen with full color and graphic display
  • Storage capacity for up to a week’s worth of data
  • Compliant with current ISO-14644
  • Ergonomic and comfortable for long periods of use
  • Grants the ability to control and monitor the instrument remotely through a PC
  • Easy data transfer to USB drive
  • Compliant with current ISO 21501-4 calibration standard

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 6715, TABMASTER AIRFLOW CAPTURE HOOD

The Kanomax TABmaster Airflow Capture Hood is an extremely lightweight and easy to handle balometer, and it’s perfect for your next HVAC test. It is equipped with professional-grade features that make this flow hood both versatile and accurate, as it simultaneously measures airflow, temperature and humidity. This unique balometer features bluetooth connectivity allowing integration with two mobile apps, Kanomax TAB Viewer and Building Start’s AirNAB (see Resources > Software and Programs), for easy data-recording and remote control. It’s the only tool you need for all your supply and return airflow measurements.

The Model 6715 is equipped with a removable, handheld micromanometer with Bluetooth® wireless capability, which stores up to 8,000 measurements. The micromanometer also has tilting capability, which allows for easy reading of the measurements while utilizing the extremely convenient, portable flow hood stand with a wheeled base.  A single operator can run a full HVAC test without ever stepping on a ladder or recruiting a helper! The TABmaster™ is available in six different hood sizes to ensure that the transparent flow hood will fit your duct size perfectly! Pressure testing, gathering face velocity readings and in-duct airflow measurements are no longer a hassle for HVAC professionals with the TABmaster™ Model 6715.

 

  • 23 to 2500 CFM (40 to 4250 m3/h) range
  • Removable handheld micromanometer with Bluetooth wireless capability.
  • Simultaneously measures and displays air flow, temperature and humidity
  • Displays the direction of the airflow as well as the velocity
  • Store up to 8,000 measurements
  • Advanced storage feature allows you to store multiple measurements under a single ID number
  • Two available apps: Kanomax TAB Viewer (for Android/iOS) and Building Start AirNAB (for iOS)
  • This is the perfect tool for accurate supply and return airflow measurements
  • Our optional interchangeable hoods make it a snap to sample the air for any duct size
  • The unit is lightweight and easy to handle
  • Simultaneously measures and displays air flow, temperature and humidity
  • Features a removable handheld micromanometer
  • A multifunctional instrument that measures airflow and pressure readings
  • Take control of your Flow Hood remotely with our TAB VIEWER APP (Android)
  • Bluetooth™ wireless function is standard
  • Air volumetric flow measurements through registers, diffusers and grilles
  • Displays Air velocity direction and measurement in full color for clear easy viewing
  • HERS (Home Energy Rating System) approved testing instrument

 

Please refer to the product’s datasheet here. (pdf)

Model 6710, TABMASTER Airflow Capture Hood

Whether you need to test a newly installed HVAC system for initial functionality, re-test a building’s HVAC after it undergoes significant constructional changes, or regular seasonal change check-ups, the TABmaster Flow Hood Model 6710 needs to be in your equipment arsenal.

The unit has some defining characteristics that put it into the running for best choice among professionals who actually operate TAB instruments in the field on a day-to-day basis.

 

  • 23 to 2500 CFM (40 to 4250 m3/h) range
  • Simultaneously measures and displays air flow, temperature and humidity
  • Displays the direction of the airflow as well as the velocity
  • Store up to 3,000 measurements
  • Advanced storage feature allows you to store multiple measurements under a single ID number
  • This is the perfect tool for accurate supply and return airflow measurements
  • Our optional interchangeable hoods make it a snap to sample the air for any duct size
  • The unit is lightweight and easy to handle
  • Simultaneously measures and displays air flow, temperature and humidity
  • Motorized tilt on meter to allow for meter angle adjustment
  • A multi-functional instrument that measures airflow and pressure readings
  • Air volumetric flow measurements through registers, diffusers and grilles
  • Displays Air velocity direction and measurement in full color for clear, easy viewing
  • HERS (Home Energy Rating System) approved testing instrument

 

Please refer to the product’s datasheet here. (pdf)

TSF14, Thermo Air Velocity Transmitter

Features

  • Temperature compensation, linear adjustment function
  • Switching analogue output by dip switch
  • Off set function by button

 

Application

  • Monitoring air and flow for industrial process
  • HVAC, building, factory

 

Please refer to the product’s datasheet here. (pdf)

VT 210, KIMO Thermo-hygrometer-anemometer

Multifunction device specially designed for the control of the ventilation systems, allowing to measure the air velocity, the airflow and the temperature in duct.

Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts.

 

FEATURES

  • Up to 6 simultaneous measurements
  • Besides speed measurement probes (vanes, hotwire or omnidirectionnal), a hygrometry probe or climatic condition and temperature module is also accepted
  • Several packs available for different applications:
  • With vane probe (100mm / 70mm / 14mm) telescopic tilting in 90 ° or standard
  • With telescopic hotwire probe tilting in 90 ° or standard
  • Optional: wired or radio temperature probe and humidity probe
  • Memory capacity: Up to 1000 dataset of 20 000 points
  • Interchangeable measurement modules
  • 2 inputs fot Pt100 temperature (from -200 to +600°C)
  • Device/probe wireless communication

 

MEASUREMENT RANGES

  • Velocity : from -5 to 35 m/s
  • Airflow : from 0 to 99 999 m3/h
  • Integrated temperature of measurement probes : -20 to 80°C

 

Please refer to the product’s datasheet (pdf)

 

VT 110 / VT 115, KIMO Hotwire thermo-anemometer

Kimo’s VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe.

 

FEATURES

  • Perfect for measuring airflow, air velocity and temperature with its hot wire probe
  • Display max / min values
  • Airflow calculation with cone
  • Dimensions of rectangular and cicular duct
  • Air velocity compensation in atmospheric pressure

 

MEASURING RANGES

  • Velocity : 0.15 m/s … 30.00 m/s
  • Airflow : 0.00 m³/h … 99999.00 m³/h
  • Temperature : -20.00 °C … 80.00 °C

 

Please refer to the product’s datasheet (pdf).

LV 130, KIMO Thermo-anemometer with Integrated Vane Probe

The Kimo LV 130 precisely measures air velocity and ambient temperature with a rotating vane probe.

 

FEATURES

  • Precisely measures air velocity and ambient temperature with a rotating vane probe
  • Selection of units (air velocity, airflow and temperature)
  • Display max / min values with hold function
  • Detection of flow direction
  •  Airflow calculation and automatic average

 

MEASURING RANGES

  • Velocity : 0.30 m/s … 35.00 m/s
  • Airflow : 0.00 m³/h … 99999.00 m³/h
  • Temperature : 0.00 °C … 50.00 °C

Please refer the product’s datasheet (pdf).

LV110, KIMO Thermo Anemometer with Vane Probe

FEATURES

  • The anemometer display velocity and temperature measurements
  • Selection of units (air velocity, airflow and temperature)
  • Display max / min values and hold function is available
  • Dimensions of rectangular and circular duct
  • Detection of flow direction

 

Available model based on measuring ranges as below:

  • LV 110 : 0.30 m/s … 35.00 m/s
  • LV 111  : 0.80 m/s … 25.00 m/s
  • LV 117  : 0.40 m/s … 35.00 m/s
  • LV 110- LV111-LV 117  : 0.00 m³/h … 99999.00 m³/h
  • LV 110- LV111-LV 117  : -20.00 °C … 80.00 °C

 

Please refer to the product’s datahseet (pdf).

DBM 620, KIMO Air Flow Meter

Kimo DBM 620 Air Flow Meter is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings from air vents.

 

FEATURES

  • Simultaneous display of up to 4 parameters. Choose between airflow, humidity, atmospheric pressure, temperature, differential pressure and air velocity
  • Simultaneous display of air flow and temperature, automatic airflow direction (extraction or air blast)
  • Automatic averaging or point by point averaging, HOLD function
  • Removable measuring unit (micromanometer function)
  • Display on smartphone or tablet by Bluetooth connection
  • Standard accessories: 610 x 610mm hood with flow straightener and flodable frame, 2 x 0.80 m of silicone tube, 1 Removable measuring unit with Bluetooth® connection, 1 Base including the measurement grid and a temperature and hygrometry probe, a transport case and a calibration cert.

 

Available Hoods
DBM 620 air flow meter comes in standard with a 610 x 610mm hood. 4 other hoods are available as options:
• 1020 x 1020 mm
• 720 x 720 mm
• 720 x 1320 mm
• 420 x 1520 mm

 

MEASURING RANGES

  • Portata (parametro calcolato) :  35.00 m³/h … 4250.00 m³/h
  • Velocità (parametro calcolato) : 0.20 m/s … 10.00 m/s
  • Temperatura (NTC) :  -20.00 °C … 70.00 °C
  • Umidità relativa (sensore capacitivo) : 0.00 % RH … 100.00 % RH
  • Pressione atmosferica  :  700.00 hPa … 1100.00 hPa
  • Pression  :  -2500.00 Pa … 2500.00 Pa

The DBM 620 Air Flow Meter comes equipped with the SmartKap mobile app. You can use SmartKap to connect to your DBM 620 via the Bluetooth® protocol, allowing you to configure the device, as well as visualize and save its measurements.

 

Please refer to the product’s datasheet (pdf).

AMI 310, KIMO Multifunction Meter

For air parameters measurements. AMI 310 measures, records up to 500 campaigns of 20000 points a day on a SD card and can restore on PC via USB until 6 simultaneous parameters according to the applications: Pressure, Temperature (Pt100 and thermocouple), Humidity, Air Quality ( CO / CO2), Air Velocity and Airflow (vane probes and hotwire), Tachometry.

 

FEATURES

  • Measurement of hygrometry, temperature, CO2, CO, air velocity, airflow,
    pressure, tachometry (depending on model and probe)
  • 2 inputs for Pt100 temperature (from -200 to 600°C), interchangeable modules
  • Up to 6 simultaneous measurements with large colour display
  • Expandable memory with micro-SD card
  • Interchangeable modules. 1 device = several possible ranges and parameters
  • Device/probe wireless connection
  • SMART-2014 System – wireless and wired probes automatically recognised

 

Please refer to the product’s datasheet (pdf).

CTV210-R, KIMO Air velocity and temperature sensor

Kimo’s CTV 210-R is a transmitter with hotwire probe measuring air velocity from 0 to 30 m/s and temperature from 0 to +50°C.

Measure prarameter: Air Velocity & Temperature

 

FEATURES

  • Measuring ranges: air velocity: from 0 to 30 m/s
  • Temperature : 0 à +50 °C
  • With or without 2-line 19-digits LCD display
  • Two relays
  • 0-5/10 V or 0/4-20 mA outputs
  • Adjustment certificate

 

Please refer to product’s datasheet (PDF)

Sale

Hotwire Anemometer

10$

Model: AI 961Measures air velocity in m/sec, ft/min, km/sec, knots or mph

Please refer to product’s datasheet (PDF)

Product Dimensions (mm): 185 x 66 x 33
Package Dimensions (mm): 0 x 0 x 0

Sale

Kestrel 1000 Wind Meter

10$

Model: Kestrel 1000 Handheld Wind Meter

 

Simple and compact, the Kestrel 1000 Handheld Wind Meter fits right in the palm of your hand and weighs a mere 2.29 ounces (65 grams). It’s also extremely durable and completely waterproof, allowing you to measure wind speeds even in the harshest weather conditions. The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort.

Convenient and reliable, the Kestrel 1000 is the perfect tool for model plane pilots, kite boarders, and other outdoor enthusiasts who rely on accurate wind speed information. The Kestrel 1000 is the most common handheld wind instrument for a DZSO (Drop Zone Safety Officer). A hard slide-on protective case, lanyard, and lithium battery are included.

 

Please refer to product’s datasheet (PDF)

 

Sale

Kestrel 5200 Professional Environmental Meter

10$

 

Model: Kestrel 5200

Whether you’re pouring concrete, balancing HVAC systems, or monitoring jobsite conditions, the Kestrel 5200 Professional Environmental Meter takes the calculations and guesswork out of your job with integrated specialty calculations. No more guessing or using inaccurate data from miles away.

The 5200’s NEW Concrete Target Evaporation Rate Solver allows user to adjust calculator for varying weather conditions and displays the risk of plastic shrinkage cracking for each scenario — enabling contractors to determine the appropriate set of precautionary steps that will result in a successful pour. The Kestrel 5200 offers advanced calculators and readings that are unique in the portable meter market and are designed to make your job easier. In addition to measuring current environmental conditions, the 5200’s new Concrete Target Evaporation Rate Solver displays the level of cracking risk based on user-defined weather conditions and shows which environmental factors may require adjustments in order to prevent plastic shrinkage cracking. With reliable real-time environmental monitoring of jobsite conditions along with accurate predictive calculations, the Kestrel 5200 Professional Environmental Meter with LiNK® Bluetooth Low Energy Technology helps concrete contractors know when to take steps to minimize the risk by adjusting the mix or utilizing protective measures.

Environmental Measurements

  • Air Density
  • Air Flow (CFM)
  • Altitude (Barometric)
  • Barometric Pressure
  • Delta T
  • Density Altitude
  • Dew Point Temperature
  • Evaporation Rate
  • Heat Stress Index
  • Humidity Ratio
  • Relative Air Density
  • Relative Humidity
  • Station Pressure (Absolute Pressure)
  • Temperature
  • Wet Bulb Temperature (Psychrometric)
  • Wind Chill
  • Wind Speed/Air Speed

 

Please download datasheet (pdf) here.

Sale

Kestrel 5100 Racing Weather Meter

10$

 

Model: kestrel 5100 Racing Weather Meter

 

The Kestrel 5100 Racing Weather Meter is Kestrel’s Racing pit meter for Bracket Racing and other forms of drag racing. Kestrel has been trusted for years for last minute tuning decisions. Get readings where it counts, on the track, not the trailer. With the new LINK technology, you can get readings right to your smartphone up to 100 feet away! The Kestrel 5100 Racing Weather Meter gives you immediate, on-spot measurements including moisture content in grains, air density, relative air density, humidity, and other critical factors. Count on it for the information you need to make perfect ET predictions and performance-maximizing tuning and jetting decisions.

The Kestrel 5100 upgraded from the Kestrel 4250 in November of 2015. Functionally, you’re getting the same environmental features with some overall big improvements to the meter itself.

Features and Measures

  • Pressure trend
  • Waterproof (sealed to IP67 standards)
  • Time and date
  • Easy-to-read backlit display
  • Data Logger (automatic and manual)
  • Customizable data storage – 2900 data points
  • Minimum, Maximum and Average values
  • Multi-Function 3-line display
  • Exterior temperature, humidity, and pressure sensors for fast and accurate readings
  • Customize screens to display user-selected measurements
  • Graph and recall trends
  • User-replaceable impeller
  • Flip-top impeller cover allows use of other functions while protecting the impeller
  • Data charting
  • Upload to a computer (with optional interface) Mac or PC
  • Works with Android and iPhone Apps!
  • Five languages (English, French, Spanish, German, and Italian)
  • Rugged (drop tested to MIL-STD-810G standards) and waterproof (sealed to IP67 standards).
  • Assembled in the USA

 

Environmental Measurements

  • Air Density
  • Altitude (Barometric)
  • Barometric Pressure
  • Density Altitude
  • Dew Point Temperature
  • Heat Stress Index
  • Moisture Content (Grains)
  • Relative Air Density
  • Relative Humidity
  • Station Pressure (Absolute Pressure)
  • Temperature
  • Wet Bulb Temperature (Psychrometric)
  • Wind Chill
  • Wind Speed/Air Speed

 

Download the datasheet (pdf) here.

Sale

Kestrel 5000 Environmental Meter

10$

Model: Kestrel 5000

The Kestrel 5000 Pocket Weather Meter is the baseline wind and weather meter in the Kestrel 5000 series. While the Kestrel 5000 Pocket Weather Meter is similar in wind and weather monitoring functions available with the Kestrel 3500 Wind Meter, it has several advantages such as Bluetooth connectivity, data storage, graphing functions, and computer interface technology. It has the capacity to store up to 10,000 data points of weather data, enabling you to track changes in the environment over time, view these changes as graphs on your Kestrel 5000’s display, and even upload the data to your PC or Mac. The Kestrel 5000 series is now available with optional Bluetooth LINK Technology, which allows your Kestrel to communicate with your Android or iOS device up to 100 feet away, and maximize the battery life of your weather meter.

Each Bluetooth Meter includes custom communication software designed to quickly and easily configure your data transmission frequency, download logged data, graph data, and transfer data to other applications.

As with all 5000 series Kestrel meters, they have both a white backlight (which is even great for daytime use) and a night-vision preserving backlight. The red night vision (NV) backlight incorporates an optical filter to reduce overall brightness and minimize blue and green spectrum light to preserve night vision. (Note: This backlight appears soft greyish pink, not “red”, and is still in the visible spectrum, so is not compatible with night-vision equipment.) Basically, with the red backlight, your eyes don’t need to adjust when looking from your meter to the horizon in night time use.

FEATURES:

  • Waterproof
  • Easy to read, backlit screen with high resolution for even bright sunny conditions.
  • Time and date
  • Exterior temperature, humidity, and pressure sensors for fast and accurate readings
  • Minimum, maximum, and average values
  • Automatically store measurements, even when the unit is turned off
  • Manually store measurements with the press of a button
  • Customizable data storage – 10,000 data points
  • Graph and recall trends
  • Customize screens to display user-selected measurements
  • Data charting
  • Data upload (with optional interface or Bluetooth)
  • Five languages (English, French, Spanish, German, and Italian)
  • User-replaceable impeller
  • Flip-top impeller cover allows use of other functions while protecting the impeller
  • All instruments and accessories are completely assembled in the USA

 

Environmental Measurements

  • Altitude (Barometric)
  • Barometric Pressure
  • Density Altitude
  • Dew Point Temperature
  • Heat Stress Index
  • Relative Humidity
  • Station Pressure (Absolute Pressure)
  • Temperature
  • Wet Bulb Temperature (Psychrometric)
  • Wind Chill
  • Wind Speed/Air Speed

 

Please download the datasheet (pdf) here.

Sale

Kestrel Meter Impeller

10$

Replacement impeller for all Kestrel Meters. User replaceable.

Impeller Replacement Instructions

Using your thumbs, press FIRMLY on the impeller module to remove the entire unit.

Press only the sides of the new impeller  when installing to avoid damaging the precision hub bearing.

Insert the impeller so that the half that has the serial number label on it goes in first and faces the back of the unit once in place.  Orient one “arm’ straight up (The impeller should look like a peace symbol or an upside-down Y).

My impeller is making a rattling/clicking/whirring noise, is that normal?

It is common for the Kestrel to make a rattling noise with a wind speed from 5 to 10 miles per hour. This is completely normal and accurate.

To better understand why the impeller rattles, one needs to know what is inside. Inside the plastic housing, there are four separate parts. The fan, two sapphire jewel bearings and a metal pin. The fan rotates around the metal pin which is held in the plastic housing by the jewel bearings. For the fan to move freely (to not cause excess friction) there is a small space (on either side) between the end of the metal pin and the jewel bearing. The space between the metal pin and the jewel bearing is what causes the rattle. Some impellers can be louder than others, but the accuracy will be the same.

1 2